Part-1

QUICK START OPERATION

1.Initialization and Loading Memory Protection Battery

1-Part

Important

You must initialize the Cash register and install the memory protection batteries before you can program the cash register.

◗To initialize the cash register

1.Set the Mode Switch to OFF.

2.Plug the power cord of the cash register into an AC outlet.

3.Load the memory protection batteries.

4.Set the Mode Switch to REG.

◗To load the memory protection batteries

1.Remove the printer cover.

2.Press down on the oval just behind the printer paper inlet, and slide the battery compartment cover toward the back of the cash register.

3.Load 3 new SUM-3 ("AA") type batteries into the compartment. Be sure that the plus

(+) and minus (–) ends of each battery are facing in the directions indicated by the illustrations inside the battery compartment (Figure 1).

4.Slide the memory protection battery compartment cover back into place.

5.Replace the printer paper and printer cover.

REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY YEAR.

(Figure 1)

To open the multipurpose tray

A

B

(1)

To lock/unlock the multipurpose tray

A. Turn the lever (1) clockwise to lock the tray (the indicator becomes red).

B. Turn the lever (1) counterclockwise to unlock the tray (the indicator becomes green).

5