Manuals / Delta / Power Tools / Saw

Delta SS250 instruction manual Refer to them often Use them to instruct others

Models: SS250

1 20
Download 20 pages 42.21 Kb
Page 3
Image 3

ADDITIONAL SAFETY RULES FOR

SCROLL SAWS

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

1.DO NOT OPERATE your scroll saw until it is completely assembled and installed according to the instructions.

2.IF YOU ARE NOT thoroughly familiar with the operation of Scroll Saws, obtain advice from your supervisor, instructor or other qualified person.

3.YOUR SCROLL SAW MUST be securely fastened to a stand or workbench. If there is any tendency for the stand or workbench to move during operation, the stand or workbench MUST be fastened to the floor.

4.THIS SCROLL SAW is intended for indoor use only.

5.MAKE SURE blade is properly tensioned before operating saw.

6.TO AVOID blade breakage ALWAYS adjust blade tension correctly.

7.MAKE SURE the blade teeth point downward toward the table.

21.NEVER start the Scroll Saw with the stock pressed against the blade.

22.WHEN cutting a large workpiece MAKE SURE the material is supported at table height.

23.USE CAUTION when cutting material which is irregular in cross section which could pinch the blade before the cut is completed. A piece of moulding for example must lay flat on the table and not be permitted to rock while being cut.

24.USE CAUTION when cutting round material such as dowel rods or tubing. They have a tendency to roll while being cut causing the blade to "bite." Use a V-block to control the piece.

25.ALWAYS release blade tension before removing the blade from the upper or lower blade holders.

26.MAKE CERTAIN table tilting lock is tightened before starting the machine.

8.NEVER turn the saw "ON" before clearing the table of all objects (tools, scraps of wood, etc.).

9.DO NOT cut material that is too small to be safely supported.

10.AVOID awkward hand positions where a sudden slip could cause a hand to move into the blade.

11.ALWAYS keep hands and fingers away from blade.

12.ALWAYS adjust holddown foot for each new operation.

13.DO NOT USE dull or bent blades.

14.DO NOT attempt to saw material that does not have a flat surface, unless a suitable support is used.

15.MAKE "relief" cuts before cutting long curves.

16.NEVER attempt to cut a curve that is too tight for the blade being used.

17.WHEN backing a blade out of a workpiece, the blade may bind in the saw kerf. This is usually caused by sawdust in the kerf. If this happens, turn "OFF" the switch and remove plug from power source outlet. Wedge open the kerf and back blade out of the workpiece.

18.THE USE of attachments and accessories not recommended by Delta may result in the risk of injuries.

19.ALWAYS hold the work firmly against the table.

20.DO NOT feed the material too fast while cutting. Only feed the material fast enough so that the blade will cut.

27.NEVER reach under the table while the machine is running.

28.NEVER perform layout, assembly or set-up work on the table while the saw is operating.

29.ALWAYS STOP the saw before removing scrap pieces from the table.

30.WHEN THE TOOL IS NOT IN USE, the switch should be locked in the “OFF” position to prevent unauthorized use.

31.SHOULD any part of your Scroll Saw be missing, damaged or fail in any way, or any electrical component fail to perform properly, shut off switch and remove plug from power supply outlet. Replace missing, damaged or failed parts before resuming operation.

32.ADDITIONAL INFORMATION regarding the safe and proper operation of this product is available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201, in the Accident Prevention Manual for Industrial Operations and also in the Safety Data Sheets provided by the NSC. Please also refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machinery and the U.S. Department of Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS.

Refer to them often

and use them to instruct others.

3

Page 2 Page 4
Page 3
Image 3
Delta SS250 instruction manual Refer to them often Use them to instruct others, Additional Safety Rules for Scroll Saws
Page 2 Page 4

SS250 specifications

The Delta SS250 is a sophisticated piece of machinery designed for demolition and excavation tasks, popularly known in construction and industrial sectors. This robust excavator is characterized by its power, efficiency, and advanced technology, making it a vital tool for professionals seeking reliability and performance in heavy-duty applications.

One of the standout features of the Delta SS250 is its powerful engine. Equipped with a high-output diesel engine, it delivers exceptional torque and fuel efficiency, enabling the operator to accomplish intense tasks with ease. The engine has been designed to comply with the latest emissions regulations, ensuring that it operates with minimal environmental impact, which is increasingly important in today’s eco-conscious world.

The SS250 comes with an advanced hydraulic system that offers enhanced lifting capabilities and precision in control. This hydraulic system enables the machine to operate various attachments, such as buckets, hammers, and grapples, drastically increasing its versatility. Operators can switch between attachments quickly and efficiently, making the machine suitable for a range of applications from digging foundations to breaking down concrete structures.

Durability is a hallmark of the Delta SS250, with a robust chassis designed to withstand the rigors of tough job sites. The body is constructed from high-strength steel, offering substantial protection against wear and tear while maintaining lightweight characteristics. This design allows for improved fuel efficiency, optimizing operational costs over time.

In terms of operator comfort, the SS250 features a spacious and ergonomic cab. The cabin is designed to minimize vibrations and noise, coupled with adjustable seating that accommodates operators of different sizes. Additionally, it comes with state-of-the-art control systems, including customizable joysticks and intuitive displays, ensuring that operators have an elevated level of comfort and control.

The Delta SS250 doesn’t just excel in performance; it incorporates advanced safety features to protect both the operator and the surrounding workforce. With an integrated safety management system, the excavator automatically performs diagnostics, ensuring all systems are functioning optimally before operation. Furthermore, the visibility from the cab is top-notch, thanks to large windows and strategically placed mirrors, enabling operators to maintain awareness of their surroundings.

In summary, the Delta SS250 is a leading excavator that combines power, durability, and advanced technology to meet the demands of modern construction and demolition projects. Its robust features, versatile attachments, and operator-centric design make it a valuable asset in any heavy equipment fleet, ensuring businesses can complete their projects on time and within budget.