Installation continued
3Connect the DB9 port on the computer to the DB9 port on the adapter cable.
4(Optional) Connect a local monitor to the Local Video port on the Local Unit using a VGA cable.
5Connect the external power supply to the power jack on the Local Unit and plug it into an appropriate power source.
6Connect the RJ45 Link ports of the Local and Remote Units using Cat5/5e/6 cable.
7Connect the HD15 port on the Remote Unit to a monitor.
8Connect the included 3.5 mm Male to DB9 Male adapter cable to the Serial port on the Remote Unit.
9Connect the DB9 Male port on the adapter cable to the DB9 port of the serial device you are connecting
10Connect the external power supply to the power jack on the Remote Unit and plug it into an appropriate power source.
11Turn the display(s) on first.
12Turn on the computer.
13If the video on your monitor is either too dark or too light, use the Gain adjustment on the Remote Unit.
14If the video on your monitor is fuzzy, or shows a ghosting effect, use the EQ adjustment on the Remote Unit.
Safety Information
•To reduce the risk of electric shock, do not expose this product to moisture.
•Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire.
•Use only recommended accessories to avoid fire, shock or other hazards.
•Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluids or aerosols, which could enter the unit and cause damage, fire or electrical shock.
•Do not attempt to service this unit. Instead, disconnect it and contact your Authorized Reseller or technician.
5
