Tripp Lite B130-101S owner manual Function Description, Installation

Function Description

1Local Video-Out Port: HD15 female connector.

2Serial Port: The included 3.5 mm Male to DB9 Female adapter cable connects here.

3Source Video-In Port: HD15 female connector.

4Power LED: Power LED illuminates when unit is receiving power.

5Power Jack: Power plug for 5V 2.0A DC power supply.

6Link: RJ-45 Modular Jack which connects the Local Unit and the Remote Unit.

7Serial Port: The included 3.5 mm Male to DB9 Male adapter cable connects here.

8Remote Video-Out Port: HD15 female connector.

9EQ Adjustment: Adjust equalization length.

10Gain Adjustment: Adjust brightness.

Installation

Remote Unit

Touch-Screen

Monitor

Local Unit

Note: You should test to make sure the entire installation works properly before pulling cables through ceilings/walls.

1Connect the HD15 port on the computer to the Sorce Video port on the Local Unit using a VGA cable.

2Connect the included 3.5 mm Male to DB9 Female adapter to the Serial port on the Local Unit.

4