Kohler K-1110 Install the Optional Apron, Complete the Finished Wall/Deck, Alcove Installation

Whirlpool

Framing

Alcove Installation

Finished Wall

Material

Finished Deck

Water-Resistant Material

Wall Material

Apply silicone sealant to the edges of the water- resistant wall material and the finished wall.

Tiling-in Bead

Drop-In Installation

Apply silicone	Wall Material
	Tile
sealant to the
edges of the water-	Whirlpool
resistant deck
material and the	Apply
finished deck.
	sealant
	Tile

Water-

ResistantBrick

Deck Material

Approved

Framing MaterialTile

Backing

Whirlpool

Concrete Installation

12. Install the Optional Apron

To install an optional apron, refer to the installation instructions included with the apron. Install this apron now, before the finished floor and wall materials are completed.

13. Complete the Finished Wall/Deck

If you have not already done so, carefully remove the protective tape from the whirlpool rim.

Cover the framing with water-resistant wall/deck material. Seal the joints between the whirlpool rim edge and the water-resistant wall/deck material with silicone sealant.

Tape and mud the water-resistant wall/deck material. Install the finished wall/deck to the water-resistant wall/deck material. Seal the joints between the whirlpool rim and the finished wall/deck material with silicone sealant.

Install the faucet trim according to the instructions packed with the trim.

14. Complete the Concrete Installation

If you have not already done so, carefully remove the protective tape from the whirlpool rim.

Apply mortar and tile to the wall, deck and surround material as needed.

Apply a bead of sealant where the tile meets the whirlpool surface.

Install the faucet trim according to the instructions packed with the trim.

15. Clean-Up After Installation

When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the whirlpool surface. If necessary, use warm water and a liquid detergent to clean the surface of the whirlpool, user keypad and remote control.

Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners containing petroleum distillates to remain in contact with any whirlpool surfaces for long periods of time. Remove plaster by carefully scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools. Use a powder-type detergent on a damp cloth to provide mild abrasive action to any residual plaster.

1019749-2-H 12 Kohler Co.