Delta TE-2000 Other function key feature programming, Cash, Charge, Check key

Other function key feature programming

You can define a selection of features for the function keys by specifying an 8-digit program code for each key.

To other function key

PGM 63s6 :::::::: 6 Function key 6 s

D8 D7 D6 D5 D4 D3 D2 D1

Mode Switch

Cash, Charge, Check key

		Restrict (to 0, 5) on the last digit for amount tendered (except a)		No = 0	:D
		(only for Australia)		Yes = 1
					8
		Always “0”			;D
					7
				Maximum
		High amount limit specification for subtotal and tendering amounts *1		value (0 ~ 9)	::D D
				Number of
					6	5
				zeros (0 ~ 9)
		Prohibit entry of a partial payment	a	No = 0
				Yes = 1
		Prohibit the entry of the amount tendered.	b	No = 0	a+b+c = :D
				Yes = 2
					4
		Force entry of the amount tendered.	c	No = 0
				Yes = 4
		Print VAT breakdown.	a	No = 0
				Yes = 1	a+b = :D
		Restriction (to 00, 25, 50, 75) on last two digits for amount tendered *2	b	No = 0
					3
				Yes = 4
				Maximum
		High amount limit specification for change amount due. *1		value (0 ~ 9)	::D D
				Number of
					2	1
				zeros (0 ~ 9)
*1	High amounts limits:
	High amount limitations are specified as 2-digits. The first digit you specify limits the maximum value of the
	leftmost digit of the value within the range of 0 through 9. The second digit you specify indicates the number of
	zeros in the limit value, again within the range of 0 through 9.
	Example: $600.00 maximum 2 Enter 64.
	Entering “00” clears the limitation.
*2	Always program “Restrict = 4” here for cash amount tendered key when you are using Danish rounding.

Convenient Operations and Setups

65 E