Delta Electronics IPM24S0B0 manual Electrical Characteristics Curves

Models: IPM24S0B0

1 14

Page 5

ELECTRICAL CHARACTERISTICS CURVES

Figure 13: Power on waveform at 12vin, 3.3V/3A out with application of Vin

Figure 14: Power on waveform at 12vin, 6.5V/3A out with application of Vin

Figure 15: Power off waveform at 12vin, 3.3V/3A out with application of Vin

Figure 18: Remote turn on delay time at 24vin, 6.5V/3A out

DS_IPM24S0B0_03202007

Image 5

Contents

OPTIONS FEATURESAPPLICATIONS 11V~36V input, 3.3~6.5V and 3A OutputINPUT CHARACTERISTICS TECHNICAL SPECIFICATIONSOUTPUT CHARACTERISTICS DYNAMIC CHARACTERISTICSEfficiency% ELECTRICAL CHARACTERISTICS CURVESEfficiency% Iout AFigure 7 Output ripple & noise at 12Vin, 4.0V/3A out ELECTRICAL CHARACTERISTICS CURVESFigure 9 Output ripple & noise at 12Vin, 5.0V/3A out Figure 11 Output ripple & noise at 12Vin, 6.5V/3A outFigure 17 Remote turn on delay time at 24vin, 6.5V/3A out ELECTRICAL CHARACTERISTICS CURVESFigure 16 Power off waveform 12vin,6.5V/3A out with application of Vin Figure 20 Turn on delay at 24vin, 6.5V/3A out with application of Vin ELECTRICAL CHARACTERISTICS CURVESFigure 19 Turn on delay at 24vin, 3.3V/3A out with application of Vin DESIGN CONSIDERATIONS TEST CONFIGURATIONSInput Source Impedance η = Vo ⋅ Io ⋅100 %Remote On/Off FEATURES DESCRIPTIONSOver-Current Protection Output Voltage ProgrammingVoltage Margining FEATURES DESCRIPTIONS CONThermal Derating Thermal Testing SetupTHERMAL CONSIDERATIONS The allowed maximum hot spot temperature is defined at THERMAL CURVESFigure 32 Temperature measurement location LEAD FREE PROCESS RECOMMEND TEMP. PROFILE PICK AND PLACE LOCATIONSURFACE- MOUNT TAPE & REEL All dimensions are in millimeters inchesSMD PACKAGE Mechanical DrawingSIP PACKAGE Note The copper pad is recommended to connect to the groundMODEL LIST WARRANTYPART NUMBERING SYSTEM