Delta Electronics LCP-10G3B4QDR manual Module Electrical Pin Definition

LCP-10G3B4QDR

Module Electrical Pin Definition

Pin	Logic	Symbol	Name/Description	Note
1		VeeT	Module Transmitter Ground	1
2	LVTTL-O	TX_Fault	Module Transmitter Fault	2
3	LVTTL-I	TX_Disable	Transmitter Disable; Turns off transmitter laser output	3
4	LVTTL-I/O	SDA	2- write Serial Interface Data Line
5	LVTTL-I/O	SCL	2- write Serial Interface Clock
6		MOD_ABS	Module Absent, connected to VeeT or VeeR in the module	4
7	LVTTL-I	RS0	Not Implement
8	LVTTL-O	RX_LOS	Receiver Loss of Signal Indication	2
9	LVTTL-I	RS1	Not Implement
10		VeeR	Module Receiver Ground	1
11		VeeR	Module Receiver Ground	1
12	CML-O	RD-	Receiver Inverted Data Output
13	CML-O	RD+	Receiver Non-Inverter Data Output
14		VeeR	Module Receiver Ground	1
15		VccR	Module Receiver 3.3V Supply
16		VccT	Module Transmitter 3.3V Supply
17		VeeT	Module Transmitter Ground	1
18	CML-I	TD+	Transmitter Non-Inverted Data Input
19	CML-I	TD-	Transmitter Inverted Data Input
20		VeeT	Module Transmitter Griund	1

Note:

1.The module signal ground pins, VeeR and VeeT, shall be isolated from the module case.

2.This pin is an open collector/drain output pin and shall be pulled up with 4.7k-10k ohms to Host_Vcc on the host board. Pull ups can be connected to multiple power supplies, however the host board design shall ensure that no module pin has voltage exceeding module VccT/R + 0.5V.

3.This pin is an open collector/drain input pin and shall be pulled up with 4.7k-10k ohms to VccT in the Module.

4.This pin shall be pulled up with 4.7k-10k ohms to Host_Vcc on the host board.

5	Revision: 0B
	2008/9/5
DELTA ELECTRONICS, INC.	www.deltaww.com