ELECTRICAL CHARACTERISTICS CURVES
Vo(+)
Copper | Strip |
|
|
10u | 1u | SCOPE | RESISTIVE |
| LOAD | ||
|
|
|
Figure 12: Input reflected ripple current, is, through a 12µH | Figure 13: Output voltage noise and ripple measurement test |
source inductor at nominal input voltage and rated load current | setup |
(20 mA/div, 2us/div). |
|
Figure 14: Output voltage ripple at nominal input voltage and rated load current (Io=30A)(50 mV/div, 2us/div)
Load capacitance: 1µF ceramic capacitor and 10µF tantalum
capacitor. Bandwidth: 20 MHz. Scope measurements should be made using a BNC cable (length shorter than 20 inches). Position the load between 51 mm to 76 mm (2 inches to 3 inches) from the module.
Figure 15: Output voltage vs. load current showing typical current limit curves and converter shutdown points.
E48SH3R330_02162007
6
