Through Hole Power Inductors
THCBR1090 Type
Features
High current ( lsat up to 70A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits,
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Mechanical Dimension:
A
B
E | RECOMMENDED PAD PATTERNS |
| 1.3(REF.) |
D
C |
UNIT:mm/inch
A = 10.5/0.42 MAX
B= 9.0/0.36 MAX.
C= 9.0/0.36 MAX
D= 9.00.5/0.360.02
E= 3.50.5/0.140.02
F= 0.9/0.03
F
Electrical Characteristics: At 25oC: 100KHz, 1.0V
PART NO. | L1 | DCR | Isat 2 | Irms 3 |
| (nH) | (m ) MAX | (Adc) | (Adc) |
150 | 0.70 | 73 | 40 | |
180 | 0.70 | 60 | 40 | |
240 | 0.70 | 40 | 40 | |
280 | 0.70 | 36 | 40 | |
350 | 0.70 | 26 | 40 | |
400 | 0.70 | 20 | 40 | |
550 | 0.70 | 12 | 40 | |
900 | 0.70 | 6.0 | 40 |
1.Tolerance of inductance : 150~900nH20%
2.Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current
3.Irms is the DC current which cause the surface temperature of the part increase less than 45oC
4.Operating temperature:
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL:
http://www.deltaww.com
151