My single-handle faucet with a DIAMOND Valve has an orange handle limit stop. How do I set it?
Some single-handle faucets with DIAMOND Seal Technology that were produced after October 1, 2008, feature a two-function handle limit stop. The handle limit stop—which enables you to limit movement of the handle, so it cannot move to the full-on hot position—offers the choice of two settings:
1.Full range of handle motion (this option is pre-set at the factory).
2.A stop option that restricts handle motion to a 50/50 mix of hot and cold water.*
To Change Your Handle Limit Stop Setting to a 50/50 Mix of Hot and Cold Water:
•Remove handle.
•Move the orange switch to the half circle setting.
*The handle limit stop should not be considered an anti-scald device.
