13 - Inside The Box

GREASE & LUBE

9

10

 

11

1

2

3

8

 

 

 

 

 

 

 

 

 

12

 

 

4

6

7

 

 

 

 

 

 

5

 

 

Reference numbers

#1 -#3-#6Are U-Joints -- Check and grease regularly.

 

Reference number #2 - Is a Telescoping P.T.O. Shaft with two slots in housing -- Fully extend P.T.O. Shaft,

 

then place one or two pumps of grease in each slot.

 

Reference numbers #4 -#5Are fixed self centering

sealed bearings -- Do not over grease sealed bearings.

 

Reference number #7 - Auger gear box is filled with 80-90 gear lube -- To check gear box find inspection allen

 

plug. Turn out plug. Gear lube should just start to run out. If low fill until gear lube just starts to run out.

 

Should be about 24-26 oz. of 80-90 gear lube. DO NOT OVER FILL!!! When gear box is full be sure to replace

 

inspection plug.

 

 

 

Reference number #8 - Is a bushing for the turn handle of the door lift assembly -- Inspect and grease as

 

needed.

 

 

 

 

Reference numbers #9 - #11 - Are fixed sealed bearings -- Do not over grease sealed bearings.

 

Reference number

#10 - Is the hinge for the outer tube. There are two zerks in this area -- Inspect and

 

grease as needed.

 

 

 

Reference number

#12 - Is the axle hub with inner and outer bearings and races -- Inspect regularly, pack

 

bearing and replace inner wheel seal as needed.

 

 

Reference number

#13 - Is four bushings on the inner door. There are four grease zerks on this door--Inspect

 

and grease every 20 hours. Also Lube the guide rods with a good lubricant at this time.

 

 

 

NOTE. Grease all zerks before each use or when needed with a good quality lubricant.

 

 

 

Do Not over grease sealed bearings. Over greasing sealed bearing will

damage seals. Once a season is generally sufficient.

Page 19

Page 18 Page 20
Page 19
Image 19
Demco grain cart, 950 bushel, 800 manual Grease & Lube
Page 18 Page 20

grain cart, 950 bushel, 800 specifications

The Demco 800,950 bushel grain cart is a cutting-edge solution designed to meet the demanding needs of modern agriculture. Leveraging advanced engineering and technological innovations, this grain cart provides farmers with an efficient and reliable means to manage their grain harvest effectively.

One of the standout features of the Demco grain cart is its impressive capacity. With a holding capacity of up to 950 bushels, it allows for large volumes of grain storage and transport, reducing the number of trips needed during harvest. This capability not only enhances productivity but also minimizes downtime, enabling farmers to maximize their operational efficiency.

The Demco grain cart is equipped with a robust, high-flow unloading system, boasting an industry-leading unloading speed. This system is designed to handle high-volume flows while minimizing grain damage, ensuring that every kernel is preserved during transport. The cart's well-engineered auger design helps facilitate smooth unloading and helps to maintain the quality of the grain.

In terms of construction, the Demco grain cart is built to withstand the rigors of agricultural use. Made from high-tensile steel with a powder-coated finish, it is designed for durability and longevity. Its overall design not only enhances strength but also ensures that the cart remains lightweight, making it easier to maneuver through fields.

Safety is another critical consideration in the design of the Demco grain cart. The cart features a low center of gravity, which contributes to stable handling, especially when navigating uneven terrain. Additionally, it incorporates LED lighting for enhanced visibility during night operations, allowing farmers to extend their working hours safely.

The grain cart also integrates advanced technology features such as a scalable weigh system. This allows farmers to monitor and record grain weights accurately, providing valuable data for yield tracking and inventory management. Moreover, compatibility with precision agriculture tools enhances productivity by allowing for better planning and resource allocation.

In summary, the Demco 800,950 bushel grain cart is a remarkable piece of equipment that combines high capacity, advanced unloading capabilities, robust construction, and innovative technology. Its thoughtful design and focus on efficiency make it an indispensable asset for farmers looking to optimize their harvest operations and increase overall productivity. As agriculture continues to evolve, the Demco grain cart stands ready to meet the needs of today and tomorrow’s farming challenges.
Top Page Image Contents