60 to 90 cm
As seen from the side
As seen from the side
Surround speaker Front speaker
60 to 90 cm
As seen from the side
As seen from the side

ENGLISH

Speaker setting examples

Here we describe a number of speaker settings for different purposes. Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose.

1.DTS-ES compatible system (using surround back speakers)

(1)Basic setting for primarily watching movies

This is recommended when mainly playing movies and using regular single way or 2-way speakers for the surround speakers.

(3)When using different surround speakers for movies and music

To achieve more effective surround sound for both movies and music, use different sets of surround speakers and different surround modes for the two types of sources.

Front speakers

• Set the front speakers slightly wider apart than the setup for watching

movies only and point them toward the listening position in order assure

Center speaker

 

clear positioning of the sound.

 

Monitor

• Set the center speaker in the same positions as in example (1).

• Set surround speakers A for watching movies in the positions described in

Subwoofer

45° ~ 60°

example (1) or (2), depending on the types of speakers used.

• Set surround speakers B for playing multi-channel music at the same height

 

Front speakers

Center speaker

Monitor

Subwoofer

45°

Surround speakers

60°

Surround back speakers

As seen from above

Set the front speakers with their front

surfaces as flush with the TV or monitor

Surround speaker

Surround back

 

speaker

screen as possible. Set the center

 

 

 

 

Point slightly

Front speaker

 

 

 

downwards

 

 

speaker between the front left and right

 

 

 

 

 

speakers and no further from the listening

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

position than the front speakers.

 

60 to 90 cm

 

 

 

 

 

Consult the owner’s manual for your

subwoofer for advice on placing the subwoofer within the listening room.

• If the surround speakers are direct-radiating (monopolar) then place them

slightly behind and at an angle to the listening position and parallel to the

walls at a position 60 to 90 centimeters (2 to 3 feet) above ear level at the

prime listening position.

• When using two surround back speakers, place them at the back facing the

front at a narrower distance than the front left and right speakers. When

using one surround back speaker, place it at the rear center facing the front

at a slightly higher position (0 to 20 cm) than the surround speakers.

Surround

 

as the front speakers and slightly at an angle to the rear of the listening

speakers A

 

 

 

 

 

 

position, and point them toward the listening position.

 

 

 

 

 

 

 

 

 

 

 

 

• Connect the surround speakers for watching movies to the surround

120°

 

 

speaker A jacks on the AVR-3802, the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

surround speakers for playing multi-

Surround speakers A

Surround back

 

 

 

 

 

 

 

channel music to the surround speaker B

 

 

 

 

 

speaker

Point slightly

 

 

Surround back

 

 

Front speaker

 

 

 

 

 

 

 

 

 

jacks. Set the surround speaker selection

 

 

 

 

 

 

downwards

 

 

speakers (A)

 

 

 

 

 

 

 

 

 

Surround speakers B

 

on the setup menu. (For instructions, see

 

 

60 to 90 cm

 

 

 

 

 

 

 

 

As seen from above

page 10.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

speakers B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.When not using surround back speakers

• We recommend installing the surround back speaker(s) at a slightly

downward facing angle. This effectively prevents the surround back

channel signals from reflecting off the monitor or screen at the front center,

resulting in interference and making the sense of movement from the front

to the back less sharp.

• Connect the surround speakers to the surround speaker A jacks on the AVR-

3802 and set all settings on the setup menu to “A”. (This is the factory

default setting. For details, see page 9.)

Front speakers Center speaker

Monitor

Subwoofer

45°

Set the front speakers with their front surfaces

as flush with the TV or monitor screen as possible. Set the center speaker between the front left and right speakers and no further from the listening position than the front speakers.

• Consult the owner’s manual for your subwoofer for advice on placing the subwoofer within the listening room.

(2)Setting for primarily watching movies using diffusion type speakers for the surround speakers For the greatest sense of surround sound envelopment, diffuse radiation speakers such as bipolar types, or dipolar types, provide a wider dispersion than is possible to obtain from a direct radiating speaker (monopolar). Place these speakers at either side of the prime listening position, mounted above ear level.

Path of the surround sound from the speakers to the listening position

120°

Surround speakers

As seen from above

• If the surround speakers are direct-radiating (monopolar) then place them slightly behind

and at an angle to the listening position and parallel to the walls at a position 60 to 90 centimeters above ear level at the prime listening position.

Connect the surround speakers to the surround speaker A jacks on the AVR- 3802 and set all settings on the setup menu to “A”. (This is the factory default setting. For details, see page 9.)

Surround speakers

60°

Surround back speakers

As seen from above

Set the front speakers, center speaker

and subwoofer in the same positions as

Surround speaker

Surround back

 

 

 

speaker

Point slightly

in example (1).

 

 

 

 

Front speaker

 

 

downwards

 

 

It is best to place the surround speakers

directly at the side or slightly to the front of the viewing position, and 60 to 90 cm

above the ears.

• Same as surround back speaker installation method (1).

Using dipolar speakers for the surround back speakers as well is more effective.

Connect the surround speakers to the surround speaker A jacks on the AVR- 3802 and set all settings on the setup menu to “A”. (This is the factory default setting. For details, see page 9.)

The signals from the surround channels reflect off the walls as shown on the diagram at the left, creating an enveloping and realistic surround sound presentation.

For multi-channel music sources however, the use of bipolar or dipolar speakers mounted at the sides of the listening position may not be satifactory in order to create a coherent 360 degree surround sound field. Connect another pair of direct radiating speakers as described in example (3) and place them at the rear corners of the room facing towards the prime listening position.

38