ENGLISH



Getting Started Connections Playback Information Troubleshooting

GUI

Make GUI related settings.
Setup
GUI
a Screensaver
s Format
d GUI time out
[Selectable items] ON OFF
NOTE
When a format other than the video format of the
connected monitor is set, the picture will not be
displayed properly. Use the procedure described
below to change the video format.
Operating from the Remote
Controller
GSet to NTSCH
• Press and hold the TOP MENU and PAGEu buttons for
at least 3 seconds.
“NTSC” is set.
GSet to PALH
• Press and hold the TOP MENU and PAGEi buttons for
at least 3 seconds.
“PAL” is set.
Always 30s 10s
[Selectable items]
NTSC PAL
[Selectable items]

Language

This sets the language used
on the display screens
Setup
Language
English Deutsch Français
Español
[Selectable items]

a Screensaver

Make screensaver settings.
Use the screensaver to prevent burn-in on
the monitor screen.
When set to ON”, the screensaver is
activated if there is no activity for about 3
minutes.

s Format

Select the video output signal format to
match the monitor.

d GUI time out

Set the GUI display time when not
operating.
b Normally there is no need to set this.
Setup