Denon ASD-3N Troubleshooting

ENGLISH

Getting Started Connections Setup Playback Information
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
Troubleshooting
Symptom Cause Countermeasure Page
Set does not work
properly when remote
control unit operated.
• Batteries are worn.
• You are operating outside of the specified range.
• Obstacle between main unit and remote control unit.
• The batteries are not inserted in the proper direction,
as indicated by the polarity marks in the battery
compartment.
• The set’s remote control sensor is exposed to strong light
(direct sunlight, inverter type fluorescent bulb light, etc.).
• Replace with new batteries.
• Operate within the specified range.
• Remove the obstacle.
• Insert the batteries in the proper direction, following the
polarity marks in the battery compartment.
• Move the set to a place in which the remote control sensor
will not be exposed to strong light.
3
3
3
3
3
GRemote Control UnitH
Symptom Cause Countermeasure Page
No sound is produced.
No image appears on the
monitor.
• The iPod is not playing.
• The iPod is not properly connected to the ASD-3N.
• The AC adapter is not connected to the ASD-3N or a power
outlet.
• The AV/Control cable is not properly connected.
• The monitor’s input selection is not properly set.
• Check that the iPod is playing.
• Check that the iPod is properly connected to the ASD-3N’s
dock connector.
• Check the connections.
• Check the connections.
• Set the monitor’s input selector to the proper position for
the connected video input terminal.
–
–
6
6
6
GGeneralH
Troubleshooting