Denon ASD-51N Connection to devices equipped with Dock Control

Connection to devices equipped with Dock Control

The ASD-51N can be operated remotely using the supplied remote control. By connecting to your existing equipment, you can play back your favourite music and video files from your iPod or from over a network.

Device equipped with DOCK CONTROL jack Monitor

ENGLISH

b1: After inserting the AC adapter plug into the wall	Getting
socket, turn the power operation switch on the	Started
side panel to “ON/STANDBY” to power up the
ASD-51N. The power indicator then lights up, and

AC outlet (wall)

AC 120 V, 60 Hz (For U.S.A. & Canada model) AC 230 V, 50 Hz (For Europe model)

b1

	"6%*0				"6%*0		7*%&0
$0"9*"-		3&.05&	%0$,	"6%*0		4 7*%&0
*/		$0/530-	$0/530-	*/		*/
				3 -

b2	b3	b4 R	L
(sold separately)	(sold separately)	(supplied)
		R	L

7*%&0

4
7*%&0

*/

or

NOTE

Connect the plug on the side to which this part is mounted to the terminal on the ASD- 51N.

after 15-20 seconds the GUI screen is displayed
	Connections
on the monitor.
b2: Digital connection is possible using a commercially
available coaxial digital cable. When using the
digital output, you will need to perform settings
in the GUI menu “Setup” – “Other” – “Audio
Output” (vpage 16). The default setting is	Setting
“Analog”. Digital output is turned off.
NOTE
When making a digital connection to a DENON	Playback
amplifier released in 2009 or earlier, you should
not use the DOCK CONTROL jack.
b3: Please use a commercially available monaural
mini-plug cable for the connection. Connect to	Information
equipment that has a REMOTE CONTROL jack.
The ASD-51N receives remote control signals
from the connected equipment, and these signals
are sent to the equipment to operate it.
b4: ASD-51N can be operated from a DENON amplifier

(supplied)

Signal		Audio signal			Video signal
direction	OUT		IN	OUT		IN

NOTE

or DENON system device equipped with a DOCK	Troubleshooting
CONTROL jack connected to the ASD-51N.
Features may be limited, depending on the device
connected.
NOTE
When using the DOCK CONTROL jack, be sure to
make an analog connection.	Specifications
Latest compatible lists

•When the DOCK CONTROL jack is connected, the ASD-51N no longer accepts remote control commands.To use the remote control unit, point it at the remote control sensor on the connected device when operating it.

•Only connect equipment which is compatible with the DOCK CONTROL jack to the DOCK CONTROL jack of the ASD-51N. Connecting non-compatible equipment will result in a malfunction.

http://denon.com/asd-51/