ENGLISH
Getting |
| Making Detailed Settings (Setup) |
|
| ||
Started |
|
|
| |||
| ||||||
| For details on how to select, set and cancel settings for each menu, see “GUI | |||||
| Menu Operation” (vpage 9, 10). | |||||
|
| |||||
Connections |
| nItems that can be set with the “Setup” procedure | ||||
| Making the network settings (Network) | |||||
|
| |||||
|
| vpage 11 |
|
|
|
|
|
| Making language settings (Language) | ||||
Setting |
| vpage 13 |
|
|
|
|
| Making the GUI settings (GUI) | |||||
|
| vpage 13 |
|
|
|
|
Playback |
|
|
|
|
| |
| vpage 14 |
|
|
|
| |
|
| Making other settings (Other) | ||||
Information |
|
|
|
|
|
|
| Making the Network Settings |
|
|
| ||
|
| (Network) |
|
|
|
|
Troubleshooting |
| Default settings are underlined. | ||||
|
| |||||
| Make network settings. | |||||
|
| |||||
|
|
|
|
|
|
|
|
| Setting items | Setting contents | |||
|
|
|
|
|
|
|
|
| Network Setup | 1. Connect the LAN cable (vpage 7). | |||
|
|
| 2. Turn on the | |||
|
|
| ||||
Specifications |
|
| the DHCP function. | |||
|
| When connecting to a network that has no DHCP | ||||
|
|
| ||||
|
|
| function, perform the setting in step 3. | |||
|
|
| 3. Set the IP address at the GUI menu “Setup” | |||
|
|
| – “Network” – “Network Setup”. | |||
|
|
|
|
|
|
|
Making Detailed Settings (Setup)
Setting items |
|
|
|
| Setting contents |
| ||||
Network Setup |
|
|
|
|
|
| ||||
| Network Setup |
|
| |||||||
(Continued) |
|
|
|
| ||||||
|
|
|
|
| DHCP | ON |
| |||
|
|
|
|
| IP Address | 192.168.11.3 |
| |||
• If you are using a | Exit |
|
| |||||||
Detail |
|
| ||||||||
broadband | router | Detail | w | |||||||
|
|
| ||||||||
(DHCP | function), |
| q |
|
|
| ||||
DHCP | OFF | |||||||||
there is no need to |
|
|
| |||||||
Up/Down | IP Address | 192.168.011.003 | ||||||||
make the settings | Back/Select | 255.255.255.0. | ||||||||
|
|
| Subnet Mask | |||||||
at | “IP | Address” |
|
|
| Default Gateway | 000.000.000.000 | |||
|
|
| Primary DNS | 000.000.000.000 | ||||||
and “Proxy”, since |
|
|
| Secondary DNS | 000.000.000.000 | |||||
the DHCP function |
|
|
| Proxy |
| |||||
|
|
|
| e | ||||||
is set to “ON” in |
|
|
|
| ||||||
|
|
|
|
| ||||||
|
|
| Up/Down | Back/Select | ||||||
the |
|
|
| |||||||
|
|
|
|
| ||||||
default settings. |
|
|
|
|
| |||||
q Select “Detail” and press ENTER. |
| |||||||||
• If | the |
| ||||||||
is | being | used | w Use p to set “DHCP” to “OFF”, then press i. | |||||||
connected | to | a | The DHCP function is disabled. |
| ||||||
network |
| without | e Use uiop to input the address and press ENTER. | |||||||
the DHCP function, | • IP Address : Set the IP address within the ranges | |||||||||
the |
|
| network | shown below. The Network Audio function cannot be | ||||||
settings | must | be | used if other IP addresses are set. |
| ||||||
made. In this case, | CLASS A : 10.0.0.0 ~ 10.255.255.255 | |||||||||
some knowledge | CLASS B : 172.16.0.0 ~ 172.31.255.255 | |||||||||
of | networks | is | CLASS C : 192.168.0.0 ~ 192.168.255.255 | |||||||
required. |
|
| For | • Subnet Mask : When connecting an xDSL modem | ||||||
details, |
| consult | or terminal adapter directly to the | |||||||
a |
|
| network | subnet mask indicated in the documentation supplied | ||||||
administrator. |
| by your provider. Normally input 255.255.255.0. |
•Default Gateway : When connected to a gateway (router), input its IP address.
DHCP (Dynamic Host Configuration Protocol)
These are systems by which the IP address and other network settings are automatically set for the
11