Network Audio Function

<FUNCTION>

ENTER D H F G

[AUX]

ENTER

D H F G

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

Listening to Internet radio

The required system connections and settings must be made in order to listen to Internet radio.

“Update?” appears on the display when connecting to an Internet radio station for the first time.

1 Use <FUNCTION> to select “AUX” or press [AUX] (AMP mode).

2 Press D H to select “Internet Radio”, then press ENTER or G.

•The initial screen when not connected to the Internet is displayed.

3 Connectingtime: to an Internet radio station for the first Press ENTER or G.

4 Press ENTER or G once again.

• The latest list of radio stations is downloaded from the vTuner site. (Several minutes are required for this download.)

5 Press D H to select the desired setting item, then press ENTER or G.

Finally, the list of Internet radio stations is displayed and those that can be played are indicated by the “∗” mark in front of them.

6 Press D H to select the desired radio station, then press ENTER or G.

•Connection starts, and the station starts playing once the buffer reaches “100 %”.

During playback, press ENTER once to pause playback, then press ENTER again to resume playback.

If ENTER is pressed and held in for more than two seconds when in the play or pause mode, playback stops and the previous menu window reappears.

12

ENGLISH

Network Audio Function

2

3

4

5

•There are many Internet radio stations on the Internet. The programs they broadcast and their bit rates vary widely.

Generally, the higher the bit rate, the higher the sound quality, but streamed music or sound may be broken if the communication lines or servers are busy. Inversely, programs with low bit rates have lower sound quality but tend to be more stable.

•“Server Full” or “Connection Down” is displayed if the station is congested or if it is not broadcasting.

•If you do not want the on screen display to be displayed while playing Network Audio (internet radio or music server), set “Function/Mode Status” at “Setting the On Screen Display” to “OFF” (Refer to “Setting the On Screen Display (OSD)” for operating instructions).

ENGLISH