ENGLISH
System Setup
System Setup
Selection of resolution setting (SCALE) |
| Setting the IP Address |
The resolution (“Resolution”) can be changed by pressing SCALE. | Set this when “OFF” is set for “DHCP”. | |
SCALE D H F G ENTER
ENTER
D H F G
SCALE
Press SCALE.
When SCALE is pressed, the current setting is shown on the display. If SCALE is pressed while the current setting is displayed, the “Resolution” setting can be changed.
• When “HDMI” is selected for the “Scaler” setting:
480p/576p | 1080i | 720p |
Through 
1080p
• When “Component” is selected for the “Scaler” setting:
480p/576p | 1080i | 720p |
Through
Setting the Network Setup
•“Network Setup” is added to the “Option Setup” items at “System Setup Menu”.
•If you are using a broadband router (DHCP function), there is no need to make the settings at “IP Address” and “Proxy”, since the DHCP function is set to “ON” in the
•If the
1 Press D H to select “Network Setup”, then press
ENTER.
2 Press D H to select “IP Address”, then press ENTER.
3 Press F G to select “OFF”.
• The DHCP function is disabled.
4 Press D H to select the desired setting item, then press G D H to input the address.
IP Address:
Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask:
When connecting an xDSL modem or terminal adapter directly to the
Gateway:
When connected to a gateway (router), input its IP address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the documentation supplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, input the first one at “Second DNS”.
About the button names in this explanation
<> : Buttons on the main unit
[ | ] : Buttons on the remote control unit |
Button name only :
Buttons on the main unit and remote control unit
5 Press ENTER.
7
ENGLISH