ENGLISH

(3) DELAY TIME

(Remote control unit)

(4) D. COMP.

(Remote control unit)

(5) LFE

Use the (left) and (right) buttons to set the delay time. (Initial)

0ms 30ms 110ms

DELAY 30ms

(left) button (right) button

Use the (left) and (right) buttons to set the D. COMP. (Initial)

OFF LOW

MID HI

D.COMP. OFF

 

(left) button

(right) button

NOTE: This parameter is displayed during DOLBY DIGITAL playback.

Use the (left) and (right) buttons to set the LFE level. (Initial)

•Operating the surround mode and surround parameters from the main unit‘s panel.

1

Turn the SELECT knob to select the surround

mode.

(Main unit)

1

2

1, 3

 

•When turned clockwise

DIRECT STEREO DOLBY PRO LOGIC II 5CH STEREO MONO MOVIE

VIRTUAL SURROUND MATRIX VIDEO GAME JAZZ CLUB ROCK ARENA

•When turned counterclockwise

DIRECT STEREO DOLBY PRO LOGIC II 5CH STEREO MONO MOVIE

VIRTUAL SURROUND MATRIX VIDEO GAME JAZZ CLUB ROCK ARENA

To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the SURROUND MODE button then operate the selector.

(Remote control unit)

LFE 0dB

-10dB 0dB

(Main unit)

(6) DEFAULT

(Remote control unit)

(left) button (right) button

NOTE: This parameter is displayed during DOLBY DIGITAL and DTS playback.

To reset the settings to the factory defaults, use the (left) and (right) buttons to display “Yes”.

 

YES

Y/N NO

DEFAULT

Y/N

 

 

(left) button

(right) button

2

Press the SURROUND PARAMETER button.

Press and hold in the surround parameter button to select the parameter you want to set.

• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 23.)

(Main unit)

3 Display the parameter you want to adjust, then turn the SELECT knob to set it.

4

Press the ENTER button to finish surround parameter mode.

 

 

(Remote control unit)

NOTE:

•When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.

Surround parameters e

ROOM SIZE:

This sets the size of the sound field.

There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field.

EFFECT LEVEL:

This sets the strength of the surround effect.

The level can be set in 15 steps from 1 to 15.

DELAY TIME:

In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.

22