ENGLISH

12 SURROUND

Before playing with the surround function

•Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 19) or from the remote control unit, as described below.

•Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the STANDARD (DOLBY/DTS SURROUND) modes. The adjusted levels for the different modes are automatically stored in the memory.

1

Set the STANDARD (DOLBY/DTS SURROUND) modes.

STANDARD

(Main unit)(Remote control unit)

2

Press the TEST TONE button.

1

 

(Remote control unit)

1

 

3

Test tones are output from the

 

 

different speakers. Use the channel

 

volume adjust buttons to adjust so

 

that the volume of the test tones is

 

the same for all the speakers.

4

(Remote control unit)

After completing the adjustment, press

 

 

the TEST TONE button again.

(Remote control unit)

33

2, 4

45