Denon AVR-2106 2, 3, 5, 4, 1, 2

Basic Operation Basic Operation

•When making parameter settings, the display will return to the

regular condition several seconds after the last button was

pressed and the setting will be completed.

2Press and hold in the SURROUND PARAMETER

button to select the parameter you want to set.

3Display the parameter you want to adjust, then

turn the SELECT knob to set it.

The parameters which can be set differ for the different

surround modes are displayed. (Refer to “Surround modes

and parameters” ( page 53).)

When turned counterclockwise:

DIRECT STEREO

MONO MOVIE DTS NEO:6

5CH/7CH STEREO

MATRIXVIRTUAL SURROUND

DOLBY PRO LOGIC

ROCK ARENA JAZZ CLUB VIDEO GAME

To select the surround mode while adjusting the surround

parameters, tone defeat or tone control, press the

SURROUND MODE button, then operate the selector.

SELECT

SURROUND PARAMETER

TONE DEFEAT

SURROUND MODE

TONE CONTROL

SURROUND

PARAMETER

CH SELECT/ENTER

SURROUND

MODE

CURSOR

2Surround parameters r

ROOM SIZE:

This sets the size of the sound field.

There are five settings: “small”, “med.s” (medium-small),

“medium”, “med.l” (medium-large) and “large”. “small”

recreates a small sound field, “large” a large sound field.

EFFECT LEVEL:

This sets the strength of the surround effect.

The level can be set in 15 steps from 1 to 15. Lower the level

if the sound seems distorted.

DELAY TIME:

The delay time can be set within the range of 0 to 110 ms only

in the matrix mode.

TONE CONTROL:

This can be set individually for each surround mode except

PURE DIRECT and DIRECT.

•When making parameter settings, the display will return to the

regular condition several seconds after the last button was

pressed and the setting will be completed.

3Press the SURROUND PARAMETER button, and

press the CURSOR DDor HHbutton to select the

various parameters.

5Press the ENTER button to finish the surround

parameter mode.

4Press the CURSOR FFor GGbutton to adjust the

parameter settings.

DSP surround simulation

2To operate the surround mode and the

surround parameters from the remote control

unit

1Select the surround mode for the input channel.

(Remote control unit)

2Press the SURROUND PARAMETER button to

enter the surround parameter setting mode.

The surround mode switches in the following order each

time the DSP SIMULATION button is pressed:

MONO MOVIE ROCK ARENA

JAZZ CLUB

MATRIX VIDEO GAME

The surround parameter switches in the following order

each time the SURROUND PARAMETER button is pressed for

the different surround modes.

2Operating the surround mode and the

surround parameters from the main unit‘s

panel

1Turn the SELECT knob to select the surround

mode.

When turned clockwise: