37
Advanced Setup – Part 1 Advanced Setup – Part 1
Example:
When the name has been changed to “DENON”
2Press the CURSOR DDor HHbutton to select the
input source whose name you want to change,
then press the CURSOR FFor GGbutton.
•The screen switches to the character input screen.
3Press the CURSOR FFor GGbutton to move the
cursor (
22
) to the character, number, symbol or
punctuation mark you wish to input, and press
the CURSOR DDor HHbutton to select that
character.
Up to 5 characters can be input.
4Repeat step 3 to complete input of the input
source name.
The names of the input sources displayed on the front display
and the on-screen display can be changed. The names or brands
of the devices connected to the input sources can be input.
Setting the Function Rename
1Press the CURSOR DDor HHbutton to select
“Function Rename” at the “Input Setup” menu,
then press the ENTER button.
•The “Function Rename” screen appears.
Example:
When “CD” is selected and the CURSOR FFor GGbutton
is pressed
AB C D E F G H I J K L M N O P Q R S T U V W X Y
Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
’( ) + , – . / : ; < = > ? [ ] (space)
If you wish to return the input source to its initial setting,
press the CURSOR HHbutton while the input source is
highlighted.
If “Yes” is selected for “Default”, the setting is
automatically reset to the default name.
5Once all the characters have been input, press
the ENTER button.
•The “Function Rename” screen appears.
•When the input source is selected, the display is as shown
below.
Use the same procedure to change other input source
names as well.
6Press the ENTER button to enter the setting.
•The “Input Setup” menu appears.
This setting assigns the color difference (component) video input
terminals of the AVR-2106 for the different input sources.
Setting the Component In Assign.
1Press the CURSOR DDor HHbutton to select
“Component In Assign.” at the “Input Setup”
menu, then press the ENTER button.
•The “Component In Assign.” screen appears.
2Press the CURSOR DDor HHbutton to select the
component video input terminal, then press the

CURSOR FFor GGbutton to select the input

source.
Select “OFF” for sources for which the component (Y,
PB/CBand PR/CR) video input is not to be used.
When the default, “Yes”, is selected, the settings are reset
to the factory defaults.
3Press the ENTER button to enter the setting.
•The “Input Setup” menu appears.