ENGLISH

Connecting a Video Component Equipped with Color Difference (Component

- Y, PR/CR, PB/CB) Video Jacks (DVD Player)

•When making connections, also refer to the operating instructions of the other components.

•The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.

•The AVR-2802’s on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT).

•Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output.

Connecting the antenna terminals

DIRECTION OF

AM LOOP

BROADCASTING

ANTENNA

STATION

(Supplied)

 

FM ANTENNA

75 Ω /ohms

 

COAXIAL

 

CABLE

 

COMPONENT VIDEO OUT

DVD player

B

Connecting a DVD player

DVD IN jacks

CRCBY

• Connect the DVD player’s color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω /ohms coaxial video pin-plug cords.

•In the same way, another video source with component video outputs such as a TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks.

Monitor TV

Connecting a monitor TV

AM OUTDOOR

ANTENNA

FM INDOOR ANTENNA (Supplied)

COMPONENT

MONITOR OUT jack

VIDEO IN

• Connect the TV’s color difference (component)

Y CB CR

video input jacks (COMPONENT VIDEO INPUT)

 

 

to the COMPONENT MONITOR OUT jack using

 

75 Ω /ohms coaxial video pin-plug cords.

GROUND

•The color difference input jacks may be indicated differently on some TVs, monitors or video components (“CR, CB and Y”, “R-Y, B-Y and Y”, “Pr, Pb and Y”, etc.). For details, carefully read the operating instructions included with the TV or other component.

AM loop antenna assembly

 

 

Connect to the AM

1

2

antenna terminals.

3

 

 

 

Remove the vinyl tie

Bend in the reverse

 

and take out the

4

connection line.

direction.

a. With the antenna on top any stable

Mount

surface.

b. With the antenna attached to a wall.

Installation hole Mount on wall, etc.

Connection of AM antennas

1. Push the

2. Insert the

3. Return the

lever.

conductor.

lever.

Notes:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.

6