16
ENGLISH

10 SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 9 to 14), make the

various settings described below on the display.

These settings are required to set up the listening room’s AV system centered around the this unit.

SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons (•, ª, 0, 1)
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.

•System setup items and default values (set upon shipment from the factory)

System setup Default settings
Speaker
Configuration
Subwoofer Mode
Digital In
Assignment
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full-size,
full-range) to automatically set the composition of the signals output
from the speakers and the frequency response.
This assigns the digital input jacks for the different input
sources. Input
source
Digital
Inputs
Front Sp.
Large
Center Sp. Surround Sp. Sub Woofer
Small Small Yes
Front & Subwoofer Center Surround L & R —
12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) —
DVD/VDP TV/DBS
COAXIAL OPTICAL
Delay Time
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
1Set the slide switch to “AUDIO”.
2Use the following buttons to set up the system:
This selects the subwoofer speaker for playing deep bass
signals. Subwoofer mode = Normal

NOTE:

•The system setup is not displayed when “HEADPHONE ONLY” is selected.