Denon AVR-1404, AVR-484 2, 3, 1, 2, 3

17
ENGLISH
Before setting up the system
1
2Press the SYSTEM SETUP button to enter the setting.
Check that all the components are correct, then press the POWER operation switch on the main unit or
the POWER button on the remote control unit to turn on the power.
3Press the ENTER or (down) button to switch to the speaker configuration set up.
*SYSTEM SET UP
NOTE:
Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time. The changes to the settings
made up to that point are entered.
NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.
(Main unit) (Remote control unit)
Setting the speaker configuration
1Use the (left) and (right) buttons to select your front speaker type.
1 FRONT LARGE LARGE SMALL
(left) button (right) button
Press the ENTER or (down) button to switch to the center speaker setting.
2Use the (left) and (right) buttons to select your center speaker type.
2 CENTER SMALL
LARGE SMALL NONE
(left) button (right) button
Press the ENTER or (down) button to switch to the surround speaker setting.
3Use the (left) and (right) buttons to select your surround speaker type.
3 SURR. SMALL
LARGE SMALL NONE
(left) button (right) button
Press the ENTER or (down) button to switch to the subwoofer setting.
NOTE:
•When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.
(Initial)
(Initial)
(Initial)