ENGLISH

8

CONNECTIONS

 

 

 

 

•

Do not plug in the power cord until all connections have been

• Note that binding pin plug cords together with power cords or

 

completed.

placing them near a power transformer will result in generating

•

Be sure to connect the left and right channels properly (left with

hum or other noise.

 

left, right with right).

• Noise or humming may be generated if a connected audio

•

Insert the plugs securely. Incomplete connections will result in

equipment is used independently without turning the power of

 

the generation of noise.

this unit on. If this happens, turn on the power of the this unit.

•

Use the AC OUTLETS for audio equipment only. Do not use

 

 

them for hair driers, etc.

 

 

 

 

Connecting the audio components

 

OUTPUT

 

R

L

Decoders with 6-channel

 

 

analog outputs, etc.

R

L

LINE OUT

CD player

Connecting a CD player

AC CORD

AC 120V, 60Hz

LINE OUT

SUB WOOFER

CENTER

FRONT

 

 

SURROUND

R

L

 

 

 

 

 

R

 

 

Connect the CD player’s analog output jacks (ANALOG OUTPUT) to this unit’s CD jacks using pin plug cords.

L

R

R L R L

LINE IN

LINE OUT

Tape deck or CD recorder

R L R L

R L R L

INPUT OUTPUT

Connecting a tape deck

Connections for recording:

Connect the tape deck’s recording input jacks (LINE IN or REC) to this unit’s tape recording (OUT) jacks using pin plug cords.

Connections for playback:

Connect the tape deck’s playback output jacks (LINE OUT or PB) to this unit’s tape playback (IN) jacks using pin plug cords.

CD recorder, MD recorder or other component

Subwoofer jack

Connect the internal amplifier’s subwoofer to the subwoofer terminal. (Refer to page 15.)

Connecting the AC OUTLETS

AC OUTLETS

• SWITCHED

(total capacity – 120 W (1 A.))

The power to these outlets is turned on and off in conjunction with the POWER switch on the main unit, and when the power is switched between on and standby from the remote control unit.

No power is supplied from these outlets when this unit’s power is at standby. Never connect equipment whose total capacity is above 120 W (1 A.)

NOTE:

Only use the AC OUTLETS for audio equipment. Never use them for hair driers, TVs or other electrical appliances.

equipped with digital output jacks.

B

OPTICAL

OUTPUT INPUT

DIGITAL jacks

Use these for connections to audio equipment with digital output. Refer to page 26 for instructions on setting this terminal.

•Use 75 Ω/ohms cable pin cords (sold separately) for coaxial connections.

•Use optical cables (sold separately) for optical connections.

10