ENGLISH
11 REMOTE CONTROL UNIT
Operating DENON audio components
• Turn on the power of the different components before operating them.
1 | Set mode switch 1 to “AUDIO”. | ||
|
|
|
|
|
|
|
|
3
2 | Set mode switch 2 to the position for the component to be |
operated. (CD, CDR/MD or Tape deck) |
1 
2
3
3 | Operate the audio component. |
|
• For details, refer to the component’s operating instructions. |
| |
| While this remote control is compatible with a wide range of infrared controlled components, some models of components may not | |
| be operated with this remote control. |
|
| 1. CD player (CD) and CD recorder and MD recorder | 2. Tape deck (TAPE) system buttons |
| (CDR/MD) system buttons |
|
|
| 6 | : Rewind |
6, 7 | : Manual search (forward and reverse) | 7 | : |
2 | : Stop | 2 | : Stop |
1 | : Play | 1 | : Forward play |
8, 9 | : Auto search (cue) | 0 | : Reverse play |
3 | : Pause | A/B | : Switch between decks A and B |
DISC | : Switch discs |
|
|
SKIP+ | (for CD changers only) |
|
|
SHIFT | : Switch preset channel range |
CHANNEL | : Preset channel |
+, – | up/down |
TUNING | : Frequency |
+, – | up/down |
BAND | : Switch between the AM and FM bands |
MODE | : Switch between auto and mono |
MEMORY | : Preset memory |
NOTE:
• TUNER can be operated when the switch is at “AUDIO” position.
28