ENGLISH

Connecting the Video Component Equipped with Color Difference (Component - Y, PR/CR, PB/CB) Video Jacks

•When making connections, also refer to the operating instructions of the other components.

•The signals input to the color difference (component) video jacks are not outputs to the VIDEO output jack (yellow) or the S-Video output jack.

•Some video sources with component video outputs are labeled Y, CB, CR or Y, Pb, Pr or Y, R-Y, B-Y. These terms all refer to component video color difference output.

COMPONENT VIDEO OUT

DVD player

Connecting a DVD player

B

Y

 

CB

 

CR

 

 

 

 

 

 

 

 

 

 

 

DVD IN jacks

• Connect the DVD player’s color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω/ohms coaxial video pin-plug cords.

•In the same way, another video source with component video outputs such as a TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks.

Monitor TV

Connecting a monitor TV

MONITOR OUT jack

COMPONENT

VIDEO IN

Y CB CR

•Connect the TV’s color difference (component) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 Ω/ohms coaxial video pin- plug cords.

The Video Conversion Function

With the AVR-1705/685, the Video signal and the S-video signal which were inputted are converted mutually. And also the Video signal and the S-Video signal which were inputted are converted into a higher quality.

This unit’s input jacks

The flow of

the

This unit’s output jacks

this unit’s internal

 

 

 

signals.

 

 

(Color Diffrence Video jack)

 

 

(Color Diffrence Video jack)

•The color difference input jacks may be indicated differently on some TVs, monitors or video components (“CR, CB and Y”, “R- Y, B-Y and Y”, “Pr, Pb and Y”, etc.). For details, carefully read the operating instructions included with the TV or other component.

MONITOR OUT jacks

The AVR-1705/685 is equpped with a function for up-converting video signals. Because of this, the AVR-1705/685’s MONITOR OUT jack can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR-1705/685’s video input jacks are connected.

Generally speaking, connections using the component video jacks offer te highest quality playback, followed by connections using the S-Video jacks, then connections using regular video jacks (yellow).

NOTE:

Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal.

Cautions on the video conversion function:

When the component video terminals are used to connect the AVR-1705/685 with a TV (or monitor, projector, etc.) and the video (yellow) or S-Video terminals are used to connect the AVR-1705/685 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync not display at all when playing video tapes.

If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-1705/685 and the VTR, or if your VTR has a TBC function, turn it on.

(S-Video jack)

(S-Video jack)

(Video jack)

(Video jack)

13