•Power amplifier Rated output:
Output terminals:•AnalogInput sensitivity / input impedance: Frequency response:S/N ratio:2Video section•Standard video jacksInput / output level and impedance: Frequency response:•Input / output level and impedance: Frequency response:
•Color component video jacksInput / output level and impedance:Frequency response:2Tuner sectionReceiving range: Usable sensitivity:
50 dB quieting sensitivity:S/N ratio:
Total harmonic distortion:2GeneralPower supply: Power consumption: Maximum external dimensions: Mass:2Remote control unitENGLISH
Front: | 75 W + 75 W | (8 | Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) | |
| 110 | W + 110 W (6 | Ω/ohms, 1 kHz with 0.7% T.H.D.) | |
Center: | 75 W | (8 | Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) | |
| 110 | W | (6 | Ω/ohms, 1 kHz with 0.7% T.H.D.) |
Surround: | 75 W + 75 W | (8 | Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) | |
| 110 | W + 110 W (6 | Ω/ohms, 1 kHz with 0.7% T.H.D.) | |
Surround back: 75W | (8 | Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) | ||
| 110 | W | (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) | |
Front: | A or B | 16 to 16 Ω/ohms | ||
| A + B | 12 to 16 Ω/ohms | ||
Center/Surround/Surr. Back: | 16 to 16 Ω/ohms |
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +1,
1
5 Hz ~ 10 MHz — +1,
Y (brightness) signal — 1
Y (brightness) signal — 1
PB/CB (blue) signal — 0.7
PR/CR (red) signal — 0.7
DC ~ 100 MHz — +0,
[FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 | [AM] | |
87.50 MHz ~ 107.90 MHz | 520 kHz ~ 1710 kHz | |
1.0 µV (11.2 dBf) | 18 µV | |
MONO | 1.6 µV (15.3 dBf) |
|
STEREO | 23 µV (38.5 dBf) |
|
MONO | 77 dB |
|
STEREO | 72 dB |
|
MONO | 0.15% (1kHz) |
|
STEREO | 0.3% (1kHz) |
|
AC 120 V, 60 Hz 4.0 A
434 (W) x 147 (H) x 417 (D) mm
R6P/AA Type (two batteries)
55 (W) x 225 (H) x 34.5 (D) mm
* For purposes of improvement, specifications and design are subject to change without notice.
65