![](/images/new-backgrounds/1031469/314691x1.webp)
A/V Receiver
AVR-786
TENTATIVE
■High-Quality Sound Reproduction
•NEW High Resolution 32bit Floating Point DSP
•96 kHz Processing Circuit
•24 bit, 192 kHz Capability High Resolution D/A Conversion
■Auto Setup with Microphone
The
■3 Sets of Component Video Inputs
The
■DENON's Basic Design for High-Quality Sound Reproduction
•Power Transformer for High Power Driven
The chassis that supports the large transformer has been designed to absorb vibra- tion, and the transformer is housed inside a highly rigid frame to secure it more solidly to the chassis. In addition, a cushioning material has been placed around the core of the transformer to minimize interference on the signal and enable more faithful repro- duction of the original sound.
The
• Twin Drive Rectifier
DENON's Twin Drive Rectifier design uses two rectifying diodes in parallel to bring out the maximum potential of the large transformer. Since the rectifiers recharge the large block capacitors at low impedance, they are able to supply ample current to reproduce deep basses as well as sudden bursts of sound from percussion or other musical instruments.
• Large Aluminum Extruded Heatsink
DENON uses a large heatsink made of extruded aluminum. It is placed in a design that ensures mostly uniform tem- peratures throughout the heatsink. This will ensures that all channels respond with equal performance to the demands of the audio signals.
■Fully Discrete, Equal Power 7 Amplifier Channels, 85 Watts Each
Front | 85 | W + 85 W | (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
Center | 85 | W | (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
Surround | 85 | W + 85 W | (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
Surround Back | 85 | W + 85 W | (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
For optimum Dolby Digital and dts reproduction, the
■Wide-Range Play Capability for DVD-Audio and Super Audio CD
The power amp circuits of the
■Dual Channel Surround Back Power Amp for 7.1 Surround
The
■Assignable surround back (L/R) amplifiers for front (L/R) channel
Amplifiers initially reserved for Surround back (L/R) channels can be assigned to bi- wire Front (L/R) channels to improve playback quality in the front for enhanced listen- ing enjoyment. Or the amplifiers can be assigned to Zone 2 speakers (with multi- source), in addition to PREOUT for Zone 2.
■Cinema Equalizer
The sound from movie sources recorded in Dolby Digital, DTS or other formats emphasizes
■Personal Memory Plus, for Easy Operation
The
■On Screen Display
The
■Acclaimed Customization Feature
As with all of DENON’s