ENGLISH
Connecting Other Sources
Connecting a tape deck
| Tape deck | |
A |
| AUDIO OUT |
|
| |
L | L | L |
| ||
R | R | R |
A |
| AUDIO IN |
|
| |
L | L | L |
R | R | R |
•If humming noise is generated, move the tape deck further away from the source of such noise.
Connecting a turntable
If humming or other noise is generated when the ground wire is connected, disconnect the ground wire.
Turntable
(MM cartridge)
A
L | AUDIO OUT |
R 
GND
NOTE:
•The phono input can accept signals from moving magnet (MM) and high output moving coil (MC) phono cartridges. If your turntable is equipped with a low output MC cartridge, you will need to use a separate MC head amplifier or
Connecting Other Sources
Connecting a CD recorder or MD recorder
If you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to an analog recorder such as a tape deck, you will need to connect the analog inputs and outputs as shown below, in addition to the digital audio connections.
| CD recorder / | |
| MD recorder | |
A |
| AUDIO OUT |
|
| |
L | L | L |
R | R | R |
D |
|
|
|
| OPTICAL |
|
| OUT |
D |
| OPTICAL |
|
| |
|
| IN |
A |
| AUDIO IN |
|
| |
L | L | L |
R | R | R |
NOTE:
•Do not connect the output of the component connected to the OPTICAL 3 OUT terminal on
the 
page 41).
15
ENGLISH