Denon AVR-886 manual 24

ENGLISH

Basic Operation

2Input mode display

•In the AUTO mode

Depending on the input signal.

•In the DIGITAL PCM mode

•In the DIGITAL DTS mode

•In the ANALOG mode

2Input signal display

•DOLBY DIGITAL

	The “DIGITAL” indicator	lights
• DTS	when digital signals are being input
	properly. If the “DIGITAL” indicator
	does not light, check whether the
	Digital In Assign. setup (	page
	41) and connections are correct and

• PCM	whether the component’s power is
	turned on.

NOTE:

•The “DIGITAL” indicator will light when playing CD-ROMs containing data other than audio signals, but no sound will be heard.

STEREO/DIRECT/PURE DIRECT

STANDARDSELECT

SURROUND PARAMETER

Surround

Playing audio sources (CDs and DVDs) 2-channel playback modes

•The AVR-886 is equipped with 2-channel playback modes exclusively for music.

•Select the mode to suit your tastes.

2PURE DIRECT mode

Use this mode to achieve good quality 2-channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and display circuit and are transmitted directly, resulting in good quality sound.

Press the STEREO/DIRECT/PURE DIRECT button on the main unit or the DIRECT/PURE DIRECT button

on the remote control unit to select the PURE DIRECT mode.

Basic Operation

STANDARD
DIRECT/	STEREO

PURE DIRECT

ENTER	SURROUND
CURSOR	PARAMETER

2DIRECT mode

Use this mode to achieve good quality 2-channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound.

Press the STEREO/DIRECT/PURE DIRECT button on the main unit or the DIRECT/PURE DIRECT button

on the remote control unit to select the DIRECT mode.

2STEREO mode

Use this mode to adjust the tone and achieve the desired sound while watching images.

Press the STEREO/DIRECT/PURE DIRECT button on the main unit or the STEREO button on the remote control unit to select the STEREO mode.

21

ENGLISH