ENGLISH

Advanced Setup – Part 1

Option Setup

Setting the Muting Level

This sets the amount of attenuation applied for audio output muting.

1 Press the CURSOR D or H button to select “Option Setup” at the “System Setup” menu, then press the ENTER button.

•The “Option Setup” menu appears.

2 Press the CURSOR D or H button to select “Muting Level” at the “Option Setup” menu, then press the ENTER button.

•The “Muting Level” screen appears.

3 Press the CURSOR F or G button to select the desired setting.

–20 dB:

Attenuation of the volume by –20 dB from the present level.

–40 dB:

Attenuation of the volume by –40 dB from the present level.

–– – dB:

The volume level is completely muted.

4 Press the ENTER button to enter the setting.

• The “Option Setup” menu appears.

Setting the On Screen Display (OSD)

•Use this to turn the on screen display (messages other than the menu screens) “ON” or “OFF”.

•Sets the on screen display mode.

1 Press the CURSOR D or H button to select “On

Screen Display” at the “Option Setup” menu, then press the ENTER button.

•The “On Screen Display” screen appears.

2 Press the CURSOR F or G button to select “ON” or “OFF”.

3 Press the CURSOR D or H button to select the on screen display mode, then press the CURSOR

For G button to select “MODE1” or “MODE2”.

MODE1:

Prevents flickering of the on screen display when there is no video signal.

MODE2:

Flickering is not prevented.

Use this mode if the on screen display does not appear in MODE1, which may happen depending on the TV being used.

4 Press the ENTER button to enter the setting.

• The “Option Setup” menu appears.

45

Advanced Setup – Part 1

Setting the Power Amp Assign.

Make this setting to switch the power amplifier for the surround back channel to ZONE2 or Bi-Amp.

Power Amp

SPEAKER OUT

PRE-OUT

Assign.

MAIN ZONE

ZONE2

S.BACK/ZONE

 

 

 

 

Surround back

7.1ch system

–

Surround back

 

 

 

 

ZONE2

5.1ch system

2ch system

ZONE2

 

 

 

 

Bi-Amp

5.1ch system

–

–

 

 

 

 

1 Press the CURSOR D or H button to select “Power Amp Assign.” at the “Option Setup” menu, then press the ENTER button.

•The “Power Amp Assign.” screen appears.

2 Press the CURSOR F or G button to select the

Amp Assign mode according to the speaker system you want to set up.

3 Press the ENTER button to enter the setting.

• The “Option Setup” menu appears.

ENGLISH