Denon AVR-887 12

ENGLISH

Easy Setup Procedure

Connecting a DVD player and monitor

•To connect the video output from the DVD player to the AVR-887, you only need to choose one

connection type. For more information about the video up conversion function ( page 15).

•To connect the digital audio output from the DVD player, you can choose from either the coaxial or optical connections. If you choose to use the coaxial connection, it needs to be assigned. For more

information about Digital Input Assignment ( page 49).

	DVD player
H	COMPONENT VIDEO OUT
		Y
		PB
		PR
I
		HDMI
		OUT
A		AUDIO OUT
L	L	L
L	L
R	R	R
G
		S VIDEO
		OUT
F
		VIDEO
		OUT
D
		OPTICAL
		OUT
C
		COAXIAL
		OUT

Audio signal flow is shown with white arrows, video signal flow is shown with gray arrows.

•Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definition disc player) to the DVD/VDP terminals in the same way.

Easy Setup Procedure

•For best picture quality (especially with progressive DVD and other high definition sources), choose the component video or HDMI connection to your monitor. S-Video and composite video outputs are also provided if your monitor does not have component video inputs.

	Monitor
H	COMPONENT VIDEO IN
H
	Y
	PB
	PR
G
	S VIDEO
	IN
F	VIDEO
	VIDEO
	IN
I
	HDMI
	IN

•The AVR-887 is equipped with HDMI terminals, so it can be connected to a DVD player or monitor using an HDMI cable.

•The component video input and/or output terminals may be labelled differently on some monitors or video components. Check the owner’s manuals for other components for further information.

•Audio signals are only output from the HDMI monitor out terminal when audio signals are input to the HDMI input terminal.

•When connecting the AVR-887 and DVD player using an HDMI cable, also connect the AVR-887 and

monitor using an HDMI cable ( page 19).

ENGLISH