Easy Setup Procedure

<POWER>

SYSTEM SETUP

<ON/STANDBY>

<SETUP MIC>

D H

F G, ENTER

[ON/SOURCE]

ENTER

D H F G

[MODE SELECTOR 1]

Auto Setup/Room Equalizer (Room EQ) Functions

•The AVR-887’s auto setup and room equalizer functions use the attached microphone to measure the acoustic properties in the room and automatically make the optimum settings.

•When the auto setup procedure is performed, one of the following three correction curves can be selected for the room equalizer function.

Normal:

Adjust the frequency response of all speaker suitable for general surround system.

Front:

This adjusts the characteristics of each speaker to the characteristics of the front speakers.

Flat:

This the frequency response of all speakers flat. This mode is optimum for playing multi-channel signal music.

•To make the sound field settings manually ( page 60 ~ 63).

ENGLISH

Easy Setup Procedure

qConnecting a microphone

1Connect the attached setup microphone to <SETUP MIC>.

Sound receptor

2 Mount the setup microphone on a camera tripod, etc., and set with the receptor pointing towards the ceiling.

Microphone

Place the setup microphone’s sound receptor at the height of the ears in the listening position.

It is not possible to measure properly if there are any obstacles between the speakers and microphone. Check that there are no obstacles.

SYSTEM SETUP

D H F G

ENTER

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

NOTE:

• Once the settings are completed, disconnect the setup microphone.

10

ENGLISH