10
ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA
Connect Preparation Setup PlaybackPlayback
10
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Setup
Playing a Blu-ray Disc player
This section explains the basic operations for surround playback using a Blu-ray
Disc player connected to this unit.
For details, see the included CD-ROM (Owner’s manual).
1Press Blu-ray to switch an input source for a player used for
playback.
MODESHIFT
BANDMEMORYCBL/SAT
Blu-ray
DVD
GAME
AUX
POWER
QUICK SELECT
21 3 4
VOLUME
INFO AUDIO
BACK SETUP
MUTETONERESTORERNIGHT
SURROUND AUDIO DELAY
ENTER
2Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles
setting, etc.) beforehand.
3Adjust the sound volume.
VOLUME d/f ····················Volume up /down
MUTE ·····��··········································Muting
4Press SURROUND 0 or SURROUND 1 to select a listening
mode.
The listening mode is displayed on the display or TV screen.
•Each time SURROUND 0 or SURROUND 1 is pressed, the listening mode is
switched. Select the desired listening mode.
When power is switched to standby GConnecting a Blu-ray Disc playerH
OUT
HDMI
HDMI
cable
(sold separately)
Blu-ray Disc player
Press POWER X.
nPower indicator status in standby mode
•Power on : Green
•Normal standby : Off
•Standby when “Pass Through” (vm page 38)
is not set to “Off” : Red
NOTE
During power standby, a minimal amount of power is
consumed. To totally cut off the power, remove the
power cord from the power outlet.
Other operations
See the following items on the included CD-ROM (Owner’s manual).
nPlaying a Blu-ray Disc player/DVD player
nPlaying a portable player
nTuning in radio stations
nSelecting a listening mode
(Surround mode)
nPlayback (Advanced operation)
nHow to make detailed settings