
About the Remote Control Unit

Inserting the Batteries
q Remove the remote | w Set two R03/AAA batteries in | ||||
control unit’s rear cover. | the battery compartment in the | ||||
| indicated direction. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Operating Range of the Remote Control Unit
Point the remote control unit at the remote sensor when operating it.
ENGLISH
Operations Connections Started Getting
ePut the rear cover back on.
NOTE
• Replace the batteries with new ones if the set does not operate even |
when the remote control unit is operated close to the unit. |
• The supplied batteries are only for verifying operation. |
• When inserting the batteries, be sure to do so in the proper direction, |
following the “q” and “w” marks in the battery compartment. |
• To prevent damage or leakage of battery fluid: |
30°
Approx. 26 ft / 8 m
NOTE
30°
Troubleshooting
• Do not use a new battery together with an old one. |
• Do not use two different types of batteries. |
• Do not attempt to charge dry batteries. |
• Do not |
flames. |
• If the battery fluid should leak, carefully wipe the fluid off the inside |
of the battery compartment and insert new batteries. |
• Remove the batteries from the remote control unit if it will not be in |
use for long periods. |
The set may function improperly or the remote control unit may not operate if the remote control sensor is exposed to direct sunlight, strong artificial light from an inverter type fluorescent lamp or infrared light.
Specifications