Denon DCD-CX3 Digital Connections, Connecting the Power Cord, Analog Connections

ENGLISH

Getting	Analog Connections
Started	Stereo receiver
	"6%*0 */
	3	-
Connections	R	L
Operations
	R	L
Troubleshooting

Digital Connections

•Connect either the “COAXIAL” or the “OPTICAL” digital output terminal.

•There is a protective cap covering the optical digital output terminal. After removing the protective cap, insert the plug firmly until it locks.

CD recorder,

MD recorder, etc.

015*$"- $0"9*"-

*/ */

Connecting the Power Cord

AC outlet (wall)

(AC 120 V, 60 Hz)

Power cord

(included)

Specifications

NOTE

• Insert the plugs securely. Incomplete connections will result in the generation of noise.

• Do not unplug the power cord while the set is operating.

No digital signals are output for Super Audio CDs.

n When connecting the optical digital output connector with an optical transmission cable (commercially available)

Protective cap	Match the
	shapes

Remove the protective cap, match the shapes, then insert firmly all the way in.

Store the protective cap in a safe place so as not to lose it, and use it when not using the terminal.