ENGLISH

2AUTO-STANDBY

This function is extremely convenient when conducting relay recording, relay playback, twin recording or tape copying.

When the Fast Rewind ( 6 ) and Rec Pause ( 3 ) buttons are pressed simultaneously while in the stop mode and the tape is set to play in the forward direction ( 1 ), the tape is rewound to the beginning, then played to the end of the leader tape and stopped automatically at the beginning of the magnetic tape.

When the Fast Forward ( 7) and Rec Pause ( 3) buttons are pressed simultaneously while in the stop mode and the tape is set to play in the reverse direction ( 0 ), the tape is fast-forwarded to the end, then played in the reverse direction to the end of the leader tape and stopped automatically at the beginning of the magnetic tape.

The Play ( 0 or 1 ) indicator flashes during the auto-standby mode.

Caution :

If recording is started after using the auto standby function with a recorded tape, the sound of the previous recording may not be completely erased. In such cases, rewind the tape before starting to record.

2TWIN RECORDING (simultaneous recording on

deck A and deck B)

This is a convenient feature for recording the same program source onto two tapes at the same time.

This function records the source input to the DECK A LINE IN jacks.

Input the source you want to record to the DECK A LINE IN jacks.

Load cassette tapes into both deck A and B. Set the DOLBY NR switch (Deck A only) and REV. MODE button.

In the twin recording mode, only the recording monitor signal of the DECK A LINE OUT jacks is output.

qPress the TWIN REC button @1. The indicator will light up and both decks will enter the

recording pause mode.

wAdjust the INPUT LEVEL-A control y for the best recording input levels while watching the Peak

Level Meter.

ePress the Play ( 0 or 1 ) button !4(deck A or B) to start twin recording.

rTo stop twin recording, press the Stop ( 2 ) button !4of each deck.

By pressing the both deck A and B Rec Pause ( 3 ) button !4, the recording pause or recording mute mode on both decks can be set automatically.

To set the twin recording mute mode from the twin recording pause mode, press the Rec/Rec Mute (4) button on both deck A and B for at least 0.5 seconds.

The relay or cascade mode cannot be set with the REV. MODE button when in the twin recording mode.

2RELAY RECORDING (continues recording from deck A to deck B)

To record a long program, start recording on deck A, and when both sides of the tape in deck A have been recorded, the relay recording feature continues to record on the tape in deck B.

This function records the source input to the DECK A LINE IN jacks.

Load cassette tapes into decks A and B, and set the DOLBY NR switch both deck A/B.

qREV. MODE button @0set to “RELAY”. The RELAY indicator will light.

 

Recording Order

 

 

 

 

Deck A

 

 

Deck B

 

 

 

 

Side facing you

 

 

Side facing you

/ Opposite side

 

 

/ Opposite side

 

 

 

 

 

 

wAdjust the INPUT LEVEL control y of both deck A

and B for the best recording input level while watching the Peak Level Meter.

ePress the Rec/Rec Mute ( 4 ) button !4of deck A to set the recording pause mode.

rPress the Play ( 0 or 1 ) button !4of deck A to start relay recording.

tTo stop relay recording, press the Stop ( 2) button !4of the deck that is recording.

If recording has been switched from Deck A to Deck B, be sure to start recording in the forward direction (1).

NOTE :

In the relay recording mode, it is not possible to perform the recording operations simultaneously on Decks A and B. Nothing happens if the recording operation is performed on one of the decks while the other deck is already in the recording mode.

2SYNCHRONIZED OPERATION

The synchro function can be used when the DN- 780R is used together with a Denon product equipped with an EXT. SYNC. IN/OUT jack.

Twin recording in sync with another DN-780R is possible.

Use a single RCA cable to connect the units’ EXT. SYNC. OUT jacks with the units’ EXT. SYNC. IN jacks.

qPress the TWIN REC button @1on one of the

units.

The twin recording command is output from the EXT. SYNC. OUT jack and the other unit is set to the twin recording mode.

wPress the Play ( 0 or 1 ) button !4on one of the units.

The play command is output from the EXT. SYNC.

OUT jack and twin recording also starts on the other unit.

ePress the Stop ( 2 ) button !4on one of the units. The stop command is output from the EXT. SYNC. OUT jack and the other unit is also set to the stop mode.

10