Denon DN-X1100 3, 4, 5, 4, 3, 2, 1

ENGLISH

Getting Started Connections Speciﬁcations

The Channel fader may be removed without any disassembly of

the DN-X1100 itself.

1Pull out the Channel fader knob.

2 Remove the ve outer screws attaching the channel

fader plate and channel fader bracket assembly from

the front panel.

3Remove the two screws attaching the channel

fader bracket assembly from chassis.

4Pull the channel fader bracket assembly forward

and unplug the 4P cable from the connector on the

channel fader printing board.

5Install the replacement assembly by reversing above

instructions.

1Follow the procedure at “Replacing the Crossfader”

to remove the Crossfader from the set.

2Move the lever so that the head of the Screw is

positioned at the hole in the case.

3Turn the Screw using a screwdriver, move the lever

and adjust to the desired torque.

4Reinstall the Crossfader following the removal

procedure in reverse order.

Fader Start

........Screw