Denon DN-X1500 manual 10

ENGLISH

6FADER START

If the separately sold DN-S5000, DN-S3000, DN-D9000, DN-D4000 and etc. players are connected to LINE2, 4, 6 or 8, they can be started using the source input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.

FADER FADER FADER FADER

LINE 2 LINE 4 LINE 6 LINE 8 LINE 2 LINE 4 LINE 6 LINE 8

DN-X1500

		FADER	FADER			FADER	FADER		RCA cord
MAIN	ALPHA	MAIN	ALPHA	MAIN	ALPHA	MAIN	ALPHA
								3.5 mm stereo mini cord
	DN-S5000				DN-S5000
	CD1				CD2

Channel Fader Start

	Turn the INPUT ASSIGN
	switch #4 to select the
1	desired source from LINE2,
	4, 6 or 8.

Turn on the CH FADER START switch @6.

2

Move the source input fader (Ch. Fader) !9of CH-1, CH-2, CH-3 or CH-4 control all the

3 way to the bottom.

4Set the standby mode on CD player.

When you want to start the player, move up the source input fader (Ch. Fader) !9and

5 the CD player will begin playing.

NOTE:

•Channel Fader Start and Crossfader Start for the same source will not operate simultaneously. You must select from either one. If both CH FADER START and CROSSFADER START A, B switches are ON, priority will be the cross fader.

Crossfader Start

	Turn the INPUT ASSIGN
	switch #4 to select the
1	desired source from LINE2,
	4, 6 or 8.

Using the CROSSFADER

ASSIGN switch !0, assign the

2channel or Sampler source into A

or B of Crossfader.

Turn on the CROSSFADER START A, B switches !7.

3

Slide the Crossfader !8all the way in direction opposite the source you want to start. (In the following example, startup is done with the CD player connected set to Assign A.)

4

5Set the standby mode on CD player.

6Use the CROSSFADER CONTOUR control @0 to control the cross fader startup curve.

When the Crossfader !8is slid in the opposite direction, CD player play will begin.

7

10