Denon DRA-775RD Specifications, Power Amplifier Section, Preamplifier Section, Video Section

The First Name In Digital Audio

DRA-775RD

		Specifications
		DRA-775RD
Power Amplifier Section
	Rated output	90W + 90W
		(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
	Total harmonic distortion	0.009%(-3dB at rated output, 8 ohms)
	Power bandwidth	5 Hz - 40 kHz (8 ohms, THD 0.15%)
	Frequency response	20 Hz - 50 kHz ± 1.5 dB (at 1W)
	Output impedance	0.1ohm (1 kHz)
Preamplifier Section
	Input sensitivity/ Impedance	PHONO (MM) : 2.5 mV/47 kohms
		CD, TAPE, VDP, VCR, V-AUX :
		150 mV/ 47 kohms
	Max. input level..	PHONO MM 150 mV/1 kHz
	RIAA deviation	20 Hz - 20 kHz ± 0.5 dB
	Signal-to-noise ratio (A-weighted)	PHONO MM 86 dB (at 5mV input)
		CD, TAPE, VDP, VCR, V-AUX : 100 dB
	Tone control	Bass 100 Hz ± 10 dB
		Treble 10 kHz ± 10 dB
	Loudness control	100 Hz : + 10 dB, 10 kHz : + 7 dB
		(at LOUDNESS “on” position)
Video Section
	Input Terminal	VDP, VCR, V-AUX : 1 Vp-p / 75 ohms
	Output terminal	VCR, MONITOR, MULTI SOURCE : 1 Vp-p / 75 ohms
FM Section
	Tuning frequency range	87.5 - 107.9 MHz
	Usable sensitivity	0.9 µV (10.3 dBf)
	S/N 50 dB sensitivity (µV at 75 ohms)	Mono : 1.6 µV (15.3 dBf)
		Stereo : 23 µV (38.5 dBf)
	Signal-to-noise ratio (A-weighting)	Mono : 82 dB, Stereo : 78 dB
	Total harmonic distortion	Mono : 0.1%, Stereo : 0.15%
	Capture ratio	1.5 dB
	AM suppression	50 dB
	Image rejection	42 dB
	Effective selectivity	55 dB (± 400 kHz)
	Frequency response	30 Hz - 15 kHz, +0.2, -1.5 dB
	Stereo separation	40 dB (1 kHz)
AM Section
	Tuning frequency range	520 - 1710 kHz
	Usable sensitivity	18 µV
	Signal-to-noise ratio	55 dB
General
	Power supply, Power consumption	AC 120 V, 60 Hz, 3.4 A
	Dimensions, Weight	434 (W) x 161 (H) x 416 (D) mm,	11.5 kg
		17.1”(W) x 6.3” (H) x 16.4” (D),	25.0 lbs

4