Denon DVD-1720 manual Changing the On-Screen Display, Kodak Picture CD

Picture1 Picture2 Picture3

Picture4 Picture5 Picture6

1/32

Current track number / the number of total tracks

DISC PLAYBACK

This player recommends the use of files recorded at the fol- lowing specifications:

Applicable MP3 file			Remarks
			• It is prohibited to record
Sampling		44.1kHz	MP3 sound on a digital
frequency		48kHz	device when the connection
			is made digitally.
		MPEG1	• MP3 files recorded at fixed
Type			bit rate of 32 kbps or higher
		audio layer 3
			are recommended.
Applicable JPEG file			Remarks
	Upper limit:		• A JPEG image that extends
Size of	6300x5100 dots		beyond the screen is
image	Lower limit:		reduced so that it will be
	32x32 dots		displayed within the screen.
Applicable WMA file			Remarks
Sampling		44.1kHz	• Those frequencies are
frequency		48kHz	applicable to WMA version 9.
			• Ensure that the copyright
Bit rate		48–192kbps	function is set to off when
			preparing a WMA disc.
			• A prohibition “disable” sym-
			bol will appear if the user
			attempts to run a non-repro-
Type		WMA version 9	ducible file such as copy-
			right-protected.
			• Recorded in 5.1 channel for-
			mat cannot be played back.

Information on MP3, JPEG and WMA discs

•This DVD player can play back images and sounds from data recorded in MP3 and JPEG formats on CD-R and CD-RW discs.

•A file with an extension of “.mp3 (MP3)” is called an MP3 file.

•A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is called a JPEG file.

The DVD player can run an image file conforming to the Exif specification. Exif is a file format, Exchangeable Image File format established by Japanese Electronic Industry Development Association (JEIDA).

•A file with an extension of “.wma (WMA)” is called a WMA file.

•Files whose extension is other than “.mp3 (MP3)”, “.jpg (JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be listed on the MP3, JPEG or WMA menu.

•If the file is not recorded in MP3, JPEG or WMA format, noise may be produced even if the file extension is either “.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma (WMA)”.

•The name of group and track can be displayed up to 25 char- acters. Unrecognisable characters will be replaced with aster- isks. The ninth and deeper hierarchies cannot be displayed.

•Unplayable groups or tracks may be displayed depending on the recording conditions.

•If the TOP MENU button is pressed when a file list is dis- played, the first item will be highlighted.

Kodak Picture CD

The DVD player can also run JPEG files stored on Kodak Picture CDs. You can enjoy picture images on the television set by playing back the Picture CDs.

For details of Kodak Picture CD, contact a shop that provide developing service of Kodak Inc.

1In stop mode, press the MENU button. Kodak Picture CD menu appears.

•If all menu items cannot be

displayed on the screen scope, “G” appears at the right bot- tom of the screen, indicating that the user can view remain- ing items on the next page.

“H” appears, it indicates that the user can view other items

on the previous page. The

track number of the currently highlighted item and the total tracks are shown at the center bottom of the screen.

•If “G” is shown at the right bottom, use the SKIP G but- ton to view the next page. If “H” is shown at the left bot- tom, use the SKIP H button to view the previous page.

•It may take some time until all menu items are dis- played on the menu screen.

2Press the Cursor buttons (K / L / s / B), select a desired track to be played back, then press the PLAY or ENTER button.

•If a Kodak Picture CD file is selected, an image will be played back from the selected track and go to the next one in turn.

3Press the STOP button, to stop playback.

NOTES on JPEG and Kodak Picture CD:

•A track is displayed for 5 or 10 seconds and then the next track is displayed.

•Every press on the Cursor button (B) will turn the image clockwise by 90 degrees when an image is dis- played. A press on the Cursor button (s) will turn the image counterclockwise by 90 degrees.

•To change the size of the playback image, press the MODE button twice. The size change mode appears on top of the TV screen during playback. Then press the Cursor buttons (s or B) or ENTER button to switch between NORMAL (100%) and SMALL (95%).

•Progressive JPEGs (JPEG files saved in the progres- sive format) will not be played back on this DVD player.

•High resolution JPEG files take longer to be displayed.

•The size change mode may have no effect on some files (e.g. files with a small picture size).

NOTES on WMA:

•The DVD player can reproduce data recorded as ISO 9660 level 2 with 31 characters file name included punctuation marks. The name of file can be displayed up to 25 characters.

•Maximum of 8 subfolders can be recognized.

•It can also be displayed tag information of WMA at least 64 characters.

•A file with an extension of Joliet as Unicode format in up to 64 characters can be recognized.

•This unit cannot play back copyright protected WMA files.

Changing the On-Screen Display

You can check information about the current disc by pressing the DISPLAY button on the remote control.

DVD

1Press the DISPLAY button

during playback. 9/49 0:00:00 -0:03:30

• Current chapter number/total chapters, elapsed time and

remaining time of the current chapter, and current play- back status will be displayed.

2Press the DISPLAY button again.

•Current title number/total titles, elapsed time and remaining time of the current title, and current playback status will be displayed.

3Press the DISPLAY button

for the third time. IIIIIII T L1

• The bit rate (the amount of video data currently being read)

and current playback status will be displayed.

•Current repeat setting appears on the right side of the display bar only when the repeat setting is active.

( C: Chapter repeat/ T: Title repeat/A B: A-B repeat)

•If you are playing back a two-layered disc, the layer number will also be displayed.

(L0: Layer 0 is played back. L1: Layer 1 is played back.)

4Press the DISPLAY button again to exit.

– 18 – EN