DVD SETUP
Display Setting
You can change certain aspects of the DVD display screens, still mode setting, the display panel on the front of the DVD player and Progressive settings.
1Press the SETUP button in stop mode.
2Press the Cursor buttons (s or B) to select
CUSTOM, then press the
ENTER button.
| • The custom mode will appear. | DISPLAY |
|
| Press the Cursor buttons (s or |
|
|
3 |
| AUTO | |
STILL MODE | |||
|
| TV ASPECT | 4:3 LETTER BOX |
| B) to select DISPLAY, then press | PROG.MODE | AUTO1 |
|
| PROGRESSIVE | OFF |
| the ENTER button to confirm. |
|
|
4Press the Cursor buttons (K or
L) to select an item, then press the ENTER button.
TV ASPECT (Default : 4:3 LETTER BOX) QUICK
•Press the Cursor buttons (K or
L) for an item selection, then press the ENTER button.
• Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen.
•Select 4:3 PAN & SCAN for a full height picture with both sides trimmed.
•Select 16:9 WIDE if a
STILL MODE (Default : AUTO)
• Press the Cursor buttons (K or L) for an item selection (AUTO, FIELD, or FRAME), then press the ENTER button.
•This function allows you to adjust picture resolution and quality in still mode.
•An individual picture on TV screen is called as “frame”, which consists of two separate images called as “field”. Some pictures may be blurred at the AUTO setting in still mode due to their data characteristics.
•AUTO: Automatically selects the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures.
•FIELD: Select FIELD when the pictures are still unsta- ble even if AUTO is selected. FIELD stabilizes the pic- tures, although the picture quality may become coarse due to the limited amount of data.
•FRAME: Select FRAME to display relatively motionless pictures in higher resolution. FRAME improves the pic- ture quality, although it may unstabilize the pictures due to simultaneous output of two field data.
PROGRESSIVE (Default: OFF) QUICK
•VIDEO: Either of top or bottom field is output for one- frame image.
5Press the SETUP button to exit and activate the new settings.
Audio Setting
You can change some Audio settings. It only affects during the playback of DVD discs.
1Press the SETUP button in stop mode.
2Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button.
•The custom mode will appear.
3 | Press the Cursor buttons (s |
|
| |
| or B) to select AUDIO, then | AUDIO |
| |
| the ENTER button to confirm. |
| ||
|
| ON | ||
| DRC | |||
| Press the Cursor buttons (K or | LPCM SELECT | OFF | |
4 | ||||
DTS | BITSTREAM | |||
|
| DOLBY DIGITAL | BITSTREAM |
L) button to select an item, then press the ENTER button.
•This menu display contains 2 pages. Press the Cursor button (L) repeatedly to show the next page.
DRC (Dynamic Range Control)
(Default : ON)
• DRC function compresses the |
| AUDIO |
| |
|
|
| ||
range of sound volume. | DRC | ON | ||
DOLBY DIGITAL | BITSTREAM | |||
|
| LPCM SELECT | OFF | |
• DRC function is available only on | DTS | BITSTREAM | ||
|
| |||
the discs that are recorded in the |
|
| ||
Dolby Digital format. |
|
| ||
LPCM SELECT (Default : OFF) |
|
| ||
• Set to ON when outputting in |
|
| ||
48kHz (or 44.1kHz). |
| AUDIO |
| |
| DRC | ON | ||
• This function is available only on | ||||
DOLBY DIGITAL | BITSTREAM | |||
|
| LPCM SELECT | OFF | |
digital outputting of a disc record- | DTS | BITSTREAM | ||
|
| |||
ed in over 96kHz (or 88kHz). |
|
| ||
When playing disc with copyright protection
•The sound will be down sampled at 48kHz, even if you set to OFF.
DOLBY DIGITAL
(Default: BITSTREAM) QUICK
• Set to BITSTREAM when the |
| AUDIO |
| |
| DRC | ON | ||
player is connected to a Dolby |
| DOLBY DIGITAL | BITSTREAM | |
|
| LPCM SELECT | OFF | |
Digital decoder. |
| DTS | BITSTREAM | |
|
|
|
| |
•This function is effective only for the COAXIAL and OPTICAL con- nections.
•Press the Cursor buttons (K or L)
for set PROGRESSIVE to ON or OFF, then press the ENTER button.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream. PCM: Convert Dolby Digital to PCM.
• The setting will be effective when you exit the setup screen by pressing SETUP.
•When PROGRESSIVE is ON, P.SCAN appears on the DVD
player’s display after you exit the setup screen.
•Refer to page 11 for more details.
4:3 LETTER BOX AUTO
OFF AUTO1
DTS
(Default: BITSTREAM) QUICK
•Set to BITSTREAM when the unit is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as
AUDIO
DRC | ON |
LPCM SELECT | OFF |
DOLBY DIGITAL | BITSTREAM |
DTS | BITSTREAM |
PROG.MODE (Default: AUTO1)
• Press the Cursor buttons (K or L) to select a setting (AUTO1, AUTO2, or VIDEO), then press the ENTER button.
•This function allows you to select the image output, depending on the base material
(video or film) of the recorded DVD images, when VIDEO OUT is set to COMPONENT PROGRESSIVE.
•AUTO1: Automatically selects the best image output (AUTO2 or VIDEO) based on the information of data stream.
•AUTO2: A combination of the top and bottom fields is output as
Bitstream.
OFF: No DTS sound will be output.
•DTS sound is output only from digital audio outputs.
5 Press the SETUP button to exit and activate the new settings.
– 22 – | EN |
