FUNCTIONAL OVERVIEW

Front Panel Display

Lights up when the progressive scan system is activated.

Lights up when the disc playback comes to a pause.

Lights up when playing back in slow mode. (DVD)

Lights up when the inserted disc is being play back.

The present display state is shown.

• TL./GR.: Title

• TR./CP.: Track or Chapter

To change to the display of a title press the DISPLAY button in the state of Resume.

Displays the chapter (title) or track number. In case the chapter (title) or track number is over 100, displays “- -”.

Displays a type of the disc which is on the tray.

•DVD: DVD, MP3, JPEG, WMA on DVD-R/RW

•CD: Audio CD, MP3, JPEG, WMA on CD-R/RW

Lights up when the repeat function is on.

Lights up when the ALL repeat function is on.

Lights up when the A-B repeat function is on.

Lights up when you have selected the audio file such as CD and MP3, WMA on the program screen.

Displays the elapsed time of the chapter (title) or track. (The display of 10 hours or more cannot be performed.) Selected HDMI output mode is displayed.

Displays During Operation

Power on

No disc inserted or cannot read

Tray open

Tray closed

Loading the disc

Power off

HDMI output mode (480p/576p) is selected (576p is displayed after 480p)

HDMI output mode (720p) is selected

HDMI output mode (1080i) is selected

HDMI output mode (1080p) is selected

HDMI output mode (OFF) is

playback is set

playback setting (folder) is selected

playback setting CLEAR is selected

playback is set

Loading the Batteries

1.Open the battery compartment cover.

2.Insert two “AA” (R6P) batteries, with each one oriented correctly.

3.Close the cover.

Using a Remote Control

Keep in mind the following when using the remote control:

•Make sure that there are no obstacles between the remote con- trol and the remote sensor on the unit.

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit.

•Remote control for different devices can interfere with each other. Avoid using remote control for other equipment located close to the unit.

•Replace the batteries when you notice a fall off in the operating range of the remote control.

•The maximum operable ranges from the unit are as follows.

-Line of sight: approx. 23 feet (7m)

-Either side of the center: approx. 16 feet (5m) within 30˚

-Above: approx. 16 feet (5m) within 15˚

-Below: approx. 10 feet (3m) within 30˚

– 10 –

EN