CONNECTIONS

The following shows examples of connections commonly used to connect the DVD player to TV and other components.

If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.

By hooking up the player to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience with powerful and high-quality surrounding sound of a professional standard which can be heard in movie theaters. Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.

NOTES:

•Be sure to turn off the power of all components in the system before connecting another component.

•Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the DVD player.

Connection to an Audio System

Method 1

 

Method 2

 

 

 

 

AV amplifier with a built in decoder

 

 

(AV control center),

 

Stereo system

Dolby Digital decoder,

 

 

DTS decoder,

 

 

 

MD deck or DAT deck

AUDIO

Audio Input Jacks

Digital Audio Input

 

 

Jacks

 

 

 

Audio cable

 

 

 

 

(supplied)

Optical cable

or

Audio Coaxial

 

 

(commercially

Digital cable

 

 

 

 

 

available)

 

(commercially

 

 

 

 

available)

DVD

AUDIO OUT

DIGITAL OUT

 

 

 

(analog)

 

 

 

English

•Method 1 DVD Player + Stereo system

•Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder, MD deck or DAT deck

NOTES (for Method 2 only):

•When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the Method 2, set DOLBY DIGITAL or DTS to BITSTREAM accordingly for audio output in the setup mode (refer to page 29). Set it to PCM for the decoder that is not used currently. Playing back a DVD using incorrect settings may generate noise dis- tortion, and may also damage the speakers.

•The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD deck or DAT deck.

•Set DOLBY DIGITAL or DTS to PCM for audio output in the setup mode for connecting to an MD deck or DAT deck (refer to page 29).

•Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a decoder, etc., that is not DTS-compatible.

•When playing back a copyright-protected 96kHz PCM DVD, the digital sound will be down sampled at 48kHz, even if you set LPCM SELECT to OFF (refer to page 29).

•Super Audio CD sound is not output from the DIGITAL OUT jacks.

Optical cable (commercially available)

•Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 6 inches (15cm) or more when storing them.

•Use a cable which is 9.8 feet (3m) or shorter.

•Insert cable plugs firmly into the connectors when making connections.

•If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

– 13 –

EN