External Finish

The surface of the set’s cabinet uses parts made from natural wood. The colors and patterns are thus natural and unique to each set. Note that the surface is coated and finished based on DENON’s strict quality standards so the set can be used without worry.

Moving the Unit

•Do not shock this unit.

•Always check that the speaker cables disconnected before moving this unit.

Cleaning

•Use a wiping cloth and wipe lightly to remove dirt from the cabinet and operation panel.

•When using chemically treated cloths, follow the precautions that have been written for them.

•Do not use benzene, thinners, or other organic solvents or insecticides on the main unit since they may cause a change in quality or color.

Other Cautions

•There are various types of speaker output terminals on amplifiers. Check your amplifier’s owner’s manual.

•Raising the amplifier’s volume excessively and playing with distorted sound could damage the amplifier and speakers. Enjoy the sound at a reasonable volume level.

•When moving the unit, note that applying strong force to the surface of the speaker through the saran net could damage the speaker.

Note that the illustrations in this instructions may differ from the actual set for explanation purposes.

Connections

When connecting, be sure to read the amplifier’s owner’s manual carefully and connect properly.

•Connect the input terminals on the rear panel of the speaker with the speaker output terminals on the amplifier, using the speaker cables (Supplied).

•Connect the speaker for the left channel to the “L” terminal on the amplifier, the speaker for the right channel to the “R” terminal on the amplifier, making sure to check the polarities (“+” and “–”).

Once connections are completed, check that all of the short-circuiting cords are securely connected to the terminals (“+” to “+”, “–” to “–” on the woofer and tweeter sides).

CAUTION

•Be sure to turn the amplifier’s power off before connecting the speakers to the amplifier.

•If the polarities are inverted, the phase may be off and the sound may have no bass component, making it seem unnatural. Be sure to connect the polarities properly.

ENGLISH

Normal Connections

“+” side terminal: Red Short-circuit cord

Connect to

 

 

amplifier’s “+” side.

 

Connect to

“–” side

amplifier’s “–”

side. (Plain core)

terminal: Black

 

1Twist firmly the wires by hand so Sheath that they do not stick out and cause short-circuits.

2Loosen the terminal, insert the cord’s core wire into the hole in the terminal, then turn the terminal clockwise to tighten it.

3Even if nothing is connected to a terminal, turn it clockwise to tighten the short-circuit cord.

•Once connections are completed, pull gently on the speaker cables to check that they are securely connected.

•The speaker cables can also be connected to the terminals using the included banana plugs.

CAUTION

Do not let the core wires of two speaker cables touch each other. Doing so will short-circuit the amplifier circuitry and damage the amplifier.

Specifications Holes Ventilation the About Net Speaker the Removing Connections Started Getting