7

ENGLISH
Getting started
Connections Operations Troubleshooting Specifications Index

Operations on the remote control unit

1Press [MEMORY].
• The preset mode is set.
2Select the preset channel number.
• Press [SHIFT] to select the memory block and use [CHANNEL]
(1–10) to select the channel number.
• The preset channel number can also be selected using
[PRESET] (+, –).
3Press [MEMORY].
• The station is preset.
Operations
Tuning in radio stations

nSpecify a name for the preset broadcast station

1Select the station whose name you want to set.
Example: To register “DENON” as the FM station name at
preset channel “A2”.
2Press <MENU>.
3Turn <TUNING/PRESET> to select “Station name”.
4Press <TUNING/PRESET>.
• The station name input mode is set.
5Either turn <TUNING/PRESET> or press [PRESET]
(+, –) and select “D”.
6Press <TUNING/PRESET> to set “D”.
• The cursor “__” starts flashing in the next place.
• Repeat steps 5 and 6 to input “E”, “N”, “O” and “N”, in that
order. (Up to 8 characters can be input.)
7Press <TUNING/PRESET> for at least 2 seconds or
press [MEMORY] to make preset channel “A2” ash.
• When “__” is flashing, preset channel “A2” can also be made
to flash by pressing <TUNING/PRESET> for at least 2 seconds
or by pressing [MEMORY].
8With channel “A2” ashing, press <TUNING/

PRESET> or [MEMORY].

• The station name you have input is stored in the memory.
• This procedure can be used to registered station names with
up to 8 digits for up to 100 AM/FM stations at random.
• The 63 characters below can be selected.
• Overwrite a “_” (Space) to erase an inputted character.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0
1 2 3 4 5 6 7 8 9 [ \ ] ^ _ ! # “ $ % & ’ ( ) * + , – . / : ; < = >
? (space)

nListening to preset stations

Operations on the main unit

1Press <MENU>.
2Turn <TUNING/PRESET> to select “Search Mode”,
then press the <TUNING/PRESET>.
3Turn <TUNING/PRESET> to select “Preset”, then
press the <TUNING/PRESET>.
• The preset search mode is set.
4Turn <TUNING/PRESET> to select the preset channel
number.

Operations on the remote control

Select the preset channel number.
• Press [SHIFT] to select the memory block and use [CHANNEL]
(1–10) to select the channel number.
• The preset channel number can also be selected using [PRESET]
(+, –).