6
ENGLISH
Getting started
Connections Operations Troubleshooting Specifi cations Index
Presetting radio stations
nFM auto preset
1Press BAND to select “FM” band.
2Press <AUTO PRESET>.
• The auto preset mode is set and the “AUTO PRESET”
indicator on the display fl ashes.
• FM broadcast stations are automatically searched for and
stored in order at the preset channels, starting from “A1”.
• When the fi rst FM broadcast station is found, that station is
stored in the preset memory at channel “A1”.
Subsequent stations are automatically stored in order at
preset channels A1 to A10, B1 to B10, C1 to C10, D1 to D10,
E1 to E10, F1 to F10, G1 to G10, H1 to H10, I1 to I10 and J1
to J10 for a maximum of 100 stations.
• Channel “A1” is tuned in after the auto preset memory
operation is completed.
• If a station’s signal is too weak to tune in using auto preset mode,
preset it manually (vpage 6).
Default value
Auto tuner presets
A1 – A10 87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1
/ 90.1 MHz
B1 – B10 522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 – C10 90.1 MHz
D1 – D10 90.1 MHz
E1 – E10 90.1 MHz
F1 – F10 90.1 MHz
G1 – G10 90.1 MHz
H1 – H10 90.1 MHz
I1 – I10 90.1 MHz
J1 – J10 90.1 MHz
Tuning in radio stations
nManual preset
• Before starting, tune in the station you want to preset.
Operations on the main unit
1Press <MENU>.
• The menu is displayed for 5 seconds.
2While the menu is displayed, turn <TUNING/
PRESET> to select “Memory”, then press <TUNING/
PRESET>.
• The preset mode is set and the preset channel number fl ashes
for about 15 seconds.
Preset channel number
“10” ...Channel number (1 – 10)
“A” .....Memory block (A – J)
3While the preset channel number is ashing, turn
<TUNING/PRESET> and select the desired preset
channel number.
A1 A2 A10 B1 B2 J9 J10
4Press <TUNING/PRESET>.
• The station currently tuned in is stored at the selected preset
channel number.
• To preset other stations, repeat steps 1 to 4.
• A total of 100 stations, FM and AM included, can be preset.
• If a station is preset at a channel number at which a different station
is already preset, the previously stored station is cleared and the
new station is preset in its place.
Button located on both the main unit
and the remote control BUTTON
Button only on the main <BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
<MENU><AUTO PRESET>BAND
<TUNING/PRESET>
[SHIFT]
BAND
[PRESET]
(+,
-
)
[MEMORY]
[CHANNEL]
(1
-
10)
Operations